Flooring Installation in Sydney

Solid hardwood can usually be sanded and refinished 2-3 times over its life, at a fraction of replacement cost. Engineered wood can typically take one light sanding if the top layer is thick enough. Replace when boards are cupped or rotten from water damage, or the wear layer is too thin to sand.

Ask every installer to itemise: material brand and wear-layer/thickness, underlay, subfloor prep, old floor removal and disposal, trims, beading and door thresholds, furniture moving, and waste allowance. The headline per-area rate is meaningless without those lines — most disputes come from prep and trims that one quote included and another did not.

Click-lock laminate and vinyl are realistic DIY projects if the subfloor is flat and rooms are simple rectangles. Glue-down vinyl, nail-down hardwood and tile are much less forgiving and usually worth paying for. Note that some manufacturers only honour warranties when a professional installs the product, and mistakes in prep are expensive to undo.

Not always — check. Underlay affects comfort, sound and moisture protection, and apartments often have minimum acoustic requirements for hard flooring. Ask what underlay is specified, whether it includes a vapour barrier for concrete subfloors, and whether it meets any building or strata sound rules.

Order 8-10% more than the measured area to cover cutting waste, and 12-15% for diagonal or herringbone patterns. Keep a spare box after the job for future repairs — matching a discontinued product years later is difficult.

Installed laminate typically runs AUD $40-$100 per m², hybrid/vinyl plank $50-$110, and engineered timber $80-$180. Labour alone is roughly $30-$50 per m², more for glue-down, stairs or herringbone.

In most strata schemes, yes. Replacing carpet with hard flooring usually requires committee approval and an acoustic underlay meeting the scheme's noise-transmission standard. Skipping approval can mean being forced to rip the floor out after neighbour complaints.