Handld.org

How much does tv mounting cost in Australia?

Low A$90
Typical A$150
High A$700
Get quotes from tv mounting pros — free, no obligation

Free, no obligation. Sign in with Google to send your request.

Key takeaways

  • Most tv mounting jobs in Australia land between A$90–A$700 — known locally as tv wall mounting.
  • TV mounting itself needs no licence in Australia, but all fixed electrical wiring — including a new power point behind the TV — must legally be performed by a licensed electrician in every state; DIY electrical work is prohibited and voids insurance. Strata bylaws may restrict drilling into common-property walls in apartments.
  • Prices below are researched national ranges, updated July 2026 — not quotes.

TV Mounting prices by job size in Australia

Researched national ranges in AUD, updated July 2026.
Job size Low Typical High
Small TV under 43" on plasterboard Fixed or tilting bracket into studs A$90 A$150 A$250
Standard TV 43-65" Stud wall, basic cable management A$120 A$200 A$320
Large TV 65"+ or full-motion bracket Articulating arm, two-person lift A$180 A$280 A$450
Cable concealment + electrician power point In-wall low-voltage run plus licensed sparky for new outlet A$250 A$400 A$700
Brick or above-fireplace install Masonry anchors, heat check, surface duct for cables A$200 A$350 A$550

Per-unit rates

Typical tv mounting rates in Australia.
Unit Low Typical High
per TV (flat rate) A$100 A$180 A$320

What affects the price

  • Job size and scope — bigger or more complex jobs move you up the ranges above.
  • Access and condition — hard-to-reach areas, older properties or neglected maintenance add labour time.
  • Materials and quality level — where materials are involved, the grade you choose often matters more than labour.
  • Urgency — same-day or out-of-hours work usually carries a premium.
  • Where you live — large metros in Australia typically run above the national range; smaller towns below it.

How to save

  • Get at least three quotes and compare like-for-like scopes, not just totals.
  • Be flexible on timing — off-peak slots are often cheaper.
  • Bundle related tasks into one visit to spread call-out costs.
  • Agree the scope in writing up front to avoid change-order surprises.

How to hire a tv mounting pro in Australia

  1. Confirm wall type — Australian homes mix plasterboard on timber or steel studs, double brick, and besser block, each priced differently
  2. Check reviews on hipages, Airtasker, or Google that mention your TV size and wall type
  3. Ask for public liability insurance (AUD 5m-10m is common for trades)
  4. Any new power point behind the TV must be installed by a licensed electrician — DIY fixed wiring is illegal in every state and territory
  5. Agree the flat price including bracket supply and cable concealment before the visit
  6. For strata apartments, check bylaws before drilling into common-property walls

Red flags

  • Offers to install a new power point without being a licensed electrician (illegal Australia-wide)
  • No ABN or insurance
  • Airtasker-style quote that excludes the bracket and adds it on arrival at a markup
  • Cannot explain how they will fix into a double-brick or besser-block wall
  • No workmanship guarantee

How Handld researches prices

These are researched estimates, not quotes and not our transaction data. We compile ranges from published sources — national statistics, trade bodies and incumbent cost guides — normalise them to AUD, and adjust city pages by a population-based cost tier. Last updated July 2026. Basis: Airtasker TV mounting task rates; hipages cost guide norms; Extrapolated from AU handyman rates $60-$100/hr.

Frequently asked questions

Is it safe to mount a TV above a fireplace?

Yes if done properly, but check two things: heat (run the fireplace for 30 minutes and confirm the wall above stays below about 40C / 100F, or fit a mantel to deflect heat) and viewing angle (a pull-down or tilting mount stops neck strain). Above-fireplace installs cost more because the wall is usually brick or stone and cable routing is harder.

Will the installer dismount my old TV or move an existing mount?

Most will, as a small add-on — typically a quarter to half the price of a fresh install. Dismount-and-remount in a new home (or after moving the sofa) is a standard job; mention it when booking so the installer brings patching filler for the old holes.

Can a TV be mounted on drywall or plasterboard without studs?

Small TVs (under about 40 inches) can go on hollow drywall with heavy-duty toggle anchors rated for the load, but most professionals prefer to hit at least one stud or install a plywood backing board. For TVs over 50 inches, mounting into studs or masonry is strongly recommended — anchor-only installs on hollow walls are the most common cause of fallen TVs.

What height should a TV be mounted at?

For seated viewing, the centre of the screen should sit at seated eye level — roughly 100-110 cm (40-43 inches) from the floor for a sofa. For a 65-inch TV that means the bottom edge sits around 60-70 cm up. Mount higher only if you use a tilting mount, e.g. above a fireplace or in a bedroom viewed from the bed.

Do I need to buy the TV mount myself?

Either works. Buying your own mount is usually cheaper — check it matches your TV's VESA pattern (the four bolt holes on the back, e.g. 400x400) and its rated weight. Many installers also sell mounts on the day at a markup of roughly 20-50% over retail. If you buy your own, tell the installer the model so they bring the right fixings.

Can I legally install a power point behind my TV myself in Australia?

No. Unlike the US or UK, Australia prohibits all DIY fixed wiring — a new power point must be installed by a licensed electrician, who will supply a certificate of compliance. Most TV installers either partner with a sparky or route an existing outlet's leads through in-wall rated cable management instead.

Does TV mounting cost more on double brick walls?

Usually yes, by roughly 20-50%. Much of Australia's older housing stock (especially WA and older east-coast suburbs) is double brick, which needs a hammer drill and masonry anchors, and in-wall cable concealment is generally not possible — installers use paintable surface duct instead.

Compare tv mounting quotes in Australia

Free, no obligation. Sign in with Google to send your request.

Related price guides

Hire a tv mounting pro