How much does home security & cctv installation cost in Australia?
Free, no obligation. Sign in with Google to send your request.
Key takeaways
- Most home security & cctv installation jobs in Australia land between A$500–A$5,000 — known locally as security system & cctv installation.
- In most Australian states, installing security equipment for reward requires a security industry licence (issued by state police licensing bodies), and fixed cabling must be performed by an ACMA-registered cabler.
- Prices below are researched national ranges, updated July 2026 — not quotes.
Home Security & CCTV Installation prices by job size in Australia
| Job size | Low | Typical | High |
|---|---|---|---|
| Alarm system install Wireless alarm with sensors and app setup | A$500 | A$900 | A$1,600 |
| 4-camera CCTV system Four wired cameras, NVR, cabling on a single-storey home | A$800 | A$1,500 | A$2,500 |
| Full smart security package Alarm + 6-8 cameras + doorbell + monitoring setup | A$1,500 | A$3,000 | A$5,000 |
Per-unit rates
| Unit | Low | Typical | High |
|---|---|---|---|
| per hour | A$90 | A$120 | A$160 |
What affects the price
- Job size and scope — bigger or more complex jobs move you up the ranges above.
- Access and condition — hard-to-reach areas, older properties or neglected maintenance add labour time.
- Materials and quality level — where materials are involved, the grade you choose often matters more than labour.
- Urgency — same-day or out-of-hours work usually carries a premium.
- Where you live — large metros in Australia typically run above the national range; smaller towns below it.
How to save
- Get at least three quotes and compare like-for-like scopes, not just totals.
- Be flexible on timing — off-peak slots are often cheaper.
- Bundle related tasks into one visit to spread call-out costs.
- Agree the scope in writing up front to avoid change-order surprises.
How to hire a home security & cctv installation pro in Australia
- Verify the installer holds a state security industry licence (e.g., NSW Police SLED licence, Vic Police LRD registration) — required for security equipment installers in most states
- Confirm cabling work is done by or with a licensed cabler (ACMA cabling registration)
- Ask about compliance with Australian privacy expectations if cameras face neighbours
- Get itemised quotes for equipment, labour, and any back-to-base monitoring
- Check warranty and whether the installer services your area for callbacks
- Confirm council or strata approval if mounting on shared walls
Red flags
- No state security licence number on the quote
- Unregistered cablers running data cable through walls
- Pressure to sign long back-to-base monitoring contracts
- Cameras pointed over fences into neighbouring yards
- Large cash deposits before any equipment is ordered
How Handld researches prices
These are researched estimates, not quotes and not our transaction data. We compile ranges from published sources — national statistics, trade bodies and incumbent cost guides — normalise them to AUD, and adjust city pages by a population-based cost tier. Last updated July 2026. Basis: hipages security installation cost guide; ServiceSeeking CCTV pricing.
Frequently asked questions
Do I need professional monitoring or is self-monitoring enough?
Self-monitoring via an app is free and fine for most households. Professional monitoring adds a monthly fee but gets a human response (and in some countries, faster police or armed-response dispatch) when you can't answer.
Will a security system lower my home insurance premium?
Often yes — many insurers discount 2-15% for professionally installed and monitored alarms, but they usually require an approved installer or certificate, so ask your insurer before booking.
How much does it cost to install a home security system?
A basic wired or wireless alarm typically costs a few hundred dollars installed, while a 4-camera CCTV setup with recorder usually lands in the mid hundreds to low thousands depending on cabling difficulty and camera quality.
How long does a security system installation take?
A wireless alarm takes 2-4 hours. A wired 4-camera CCTV system typically takes a full day; 8+ cameras or multi-storey cabling can run to two days.
What's included in a typical CCTV quote?
Cameras, a recorder (NVR/DVR) or cloud plan, cabling and clips, power supplies, mounting, app setup, and a walkthrough. Check whether the hard drive, warranty, and follow-up support visits are included.
Wired or wireless security cameras — which should I choose?
Wired systems are more reliable and cheaper to run long-term but cost more to install because of cabling labour. Wireless is faster to fit and better for renters, but batteries and Wi-Fi dropouts are ongoing maintenance.
Can I point my cameras at the street or my neighbour's property?
Generally no. Most countries' privacy rules require cameras to cover your own property; capturing neighbours' gardens or public footpaths can trigger data-protection obligations or complaints, so installers angle and mask cameras accordingly.
Does my installer need a security licence in Australia?
Yes in most states — NSW, VIC, QLD and WA all license security equipment installers through police licensing units. Ask for the licence number and check it against the state register before booking.
Free, no obligation. Sign in with Google to send your request.