Concrete Work in Kwinana
Compare local concreting pros in Kwinana and get free quotes — no obligation, no call-backs you didn't ask for.
Typical price: A$280–A$12,900
Free, no obligation. Sign in with Google to send your request.
Concrete Work prices in Kwinana
| Job size | Low | Typical | High |
|---|---|---|---|
| Crack / patch repair Repair cracked or spalled areas | A$280 | A$640 | A$1,400 |
| Slab or patio Reinforced slab for shed, patio or alfresco area | A$2,300 | A$4,150 | A$7,350 |
| Driveway Full-depth driveway with crossover and finish | A$4,600 | A$7,800 | A$12,900 |
How to hire a concrete work pro in Australia
- Check state licensing — concreting is licensed trade work in QLD (QBCC) and requires a contractor licence in NSW above $5,000
- Get slab thickness, mesh (SL72/SL82 typical) and mix strength (20-32 MPa) in writing
- Confirm compacted road base and plastic membrane under the slab
- Agree the finish: plain, coloured, exposed aggregate or covercrete
- Ask about council crossover requirements for driveways
- Compare 3 itemized quotes with local references
Concreting is regulated state-by-state in Australia — QBCC licensing in Queensland, contractor licensing in NSW over $5,000 — and residential slabs follow AS 2870/AS 3600 standards. Exposed aggregate is the dominant decorative driveway finish.
Budgeting first?
See the full breakdown of what drives concrete work prices — job sizes, unit rates, and how to save.
Frequently asked questions
What finishes can concrete have?
Broom (non-slip, standard outdoors), steel trowel (smooth, indoor), exposed aggregate, stamped/patterned, coloured and polished. Decorative finishes can add 30-100% to the base rate but replace the cost of a separate surface like pavers or tiles.
How thick should a concrete slab be?
Common rules of thumb: 75-100mm (3-4") for paths and patios, 100-125mm (4-5") for driveways and garage floors, more for heavy vehicles — always over a compacted sub-base with mesh or fibre reinforcement. Thin slabs on soft ground crack no matter how good the finish looks.
What should a concreting quote include?
Excavation and sub-base, formwork, reinforcement (mesh size or fibre dose), concrete grade and thickness, the finish (broom, trowel, exposed aggregate, stamped), control joints, curing method, and spoil removal. Any quote that just says 'supply and lay concrete' leaves too much undefined.
How much does concrete work cost?
Concrete is priced by area and thickness for slabs (per m² or sq ft), by volume for supply (per cubic metre/yard), and by the job for repairs. The concrete itself is often less than half the bill — formwork, reinforcement, sub-base preparation, finishing and access drive the labour cost.
Can damaged concrete be repaired instead of replaced?
Surface spalling, small cracks and pitting can be patched, resurfaced with an overlay, or ground back. Slabs that have sunk can sometimes be lifted with foam or grout injection ('slabjacking') for far less than replacement. Structural failure or widespread base movement means replacement.
What does concreting cost per m² in Australia?
Plain concrete typically runs $65-95 per m² laid, coloured $75-110, and exposed aggregate $100-160. Site access, pumping and excavation add to the base rates.
Free, no obligation. Sign in with Google to send your request.
How Handld works
- 1
Tell us what you need
Describe the job and where you are. It takes about a minute.
- 2
We match your request
Your request goes to local professionals who cover your area and service.
- 3
Compare quotes and choose
Pros reply with quotes. Compare, ask questions and hire on your terms — free for you.
Concrete Work near Kwinana
- Concrete Work in Baldivis
- Concrete Work in Canning Vale
- Concrete Work in Perth
- Concrete Work in Mandurah
- Concrete Work in Bunbury
- Concrete Work in Albany
- Concrete Work in Geraldton
- Concrete Work in Adelaide
- Concrete Work in Adelaide Hills
- Concrete Work in Mildura
- Concrete Work in Warrnambool
- Concrete Work in Ballarat
- All concrete work in Western Australia