Bathroom Renovation in Melbourne City Centre

Walk-in showers cost less to build than bath-plus-screen setups, use less space, and suit ageing-in-place. Keep at least one bathtub in the home if you may sell to families — in most markets a home with no bath at all narrows the buyer pool. If you have two bathrooms, the common answer is one of each.

Around 10-20% is normal, sometimes more where custom vanities or imported fittings must be ordered up front — in that case pay the supplier invoice share, not a round 50%. Hold 5-10% back until the room has been used for a week or two and the snag list (grout gaps, silicone, door alignment) is closed.

Run every fixture: check drainage speed, look under the vanity for weeps, confirm the shower floor falls to the drain (pour a bucket and watch), check grout lines are even and silicone is continuous, and test the extractor fan. Photograph everything and get the waterproofing product and warranty terms in writing before releasing final payment.

A straight swap-in-place refit takes about 1-2 weeks; a full renovation with new waterproofing, retiling, and any layout change takes 2-4 weeks. Add waiting time before the start for fixture delivery and trades scheduling — and note that waterproofing membranes need curing days you cannot compress.

The HIA Kitchens and Bathrooms Report puts the median around AUD 26,000-27,000, with budget renovations from about AUD 10,000-15,000 and premium projects AUD 35,000-80,000. Waterproofing, licensed trades, and certification requirements make Australian bathrooms pricier than comparable UK/US work.

State law prohibits unlicensed plumbing and electrical work — fines apply and your home insurance can refuse claims arising from it. DIY is fine for demolition, painting, and assembly-type tasks; everything touching water, waste, or wiring must be a licensed trade with compliance certificates.