Handld.org

Aircon Installation in Melbourne

Compare local air conditioning installer pros in Melbourne and get free quotes — no obligation, no call-backs you didn't ask for.

Typical price: A$1,700–A$28,700

Get quotes from aircon installation pros in Melbourne — free, no obligation

Free, no obligation. Sign in with Google to send your request.

Aircon Installation prices in Melbourne

Researched estimates for Melbourne (AUD), adjusted for city size from national ranges. Updated 2026.
Job size Low Typical High
Single split system (1 room) One outdoor + one indoor wall unit A$1,700 A$3,200 A$5,750
Multi-head system (3 rooms) One outdoor unit serving three indoor heads A$5,750 A$9,800 A$16,100
Ducted whole-home system Ducted split with zoning for the whole house A$10,400 A$17,300 A$28,700

How to hire a aircon installation pro in Australia

  1. Confirm the installer holds an ARCtick (refrigerant handling) licence
  2. Check a licensed electrician does the electrical connection
  3. Get a sizing/load calc for the room or home
  4. Confirm the star rating and running-cost estimate
  5. Ask about outdoor-unit siting and noise (council rules)
  6. Get manufacturer + workmanship warranties in writing

Refrigerant handling in Australia requires an ARCtick licence from the Australian Refrigeration Council, and the electrical connection must be done by a licensed electrician. Split systems dominate; ducted and multi-head installs are common in larger homes. Energy star ratings guide running costs.

Budgeting first?

See the full breakdown of what drives aircon installation prices — job sizes, unit rates, and how to save.

Aircon Installation cost guide for Australia

Frequently asked questions

What maintenance does air conditioning need after install?

Clean or replace filters regularly, and have the system serviced roughly annually — coil clean, gas-pressure check and drainage clear. Skipping maintenance cuts efficiency, breeds mould in the drain, and shortens compressor life. Ask about a service plan at install.

How much does it cost to install air conditioning?

A single-zone split unit for one room is the cheapest entry point; a multi-zone system serving several rooms is a mid-range job; a ducted/central system for a whole home is the priciest. The unit's size (in BTU/kW) and the difficulty of the pipe and cable runs drive cost more than the brand.

What size air conditioner do I need?

Sizing is by room area, ceiling height, insulation, window area and sun exposure — a good installer does a load calculation, not a guess. An undersized unit runs constantly and never cools; an oversized one short-cycles and wastes energy. Insist on a sizing rationale in the quote.

How long does an aircon install take?

A back-to-back single split is often a half-day job; a multi-split takes one to two days; ducted installs run two to four days depending on the ductwork. Long pipe runs, wall chasing and crane access for outdoor units add time.

How do I find a good aircon installer near me in Melbourne?

In Melbourne, get three quotes from certified installers, check reviews and refrigerant-handling credentials, and confirm the sizing and electrical scope in writing. The cheapest quote often skips the load calc or the dedicated circuit.

Should I get a split system, multi-split, or ducted?

A single split cools one room cheaply. A multi-split runs several indoor heads off one outdoor unit — good for a few rooms without ductwork. Ducted gives even whole-home comfort but costs most and needs ceiling/roof space. Match the choice to how many rooms you actually cool.

Does aircon installation include the electrical work?

Not always. A new unit often needs a dedicated circuit and isolator, which may require a licensed electrician. Confirm whether the quote includes the electrical supply, or whether that's a separate cost you'll arrange yourself.

What does aircon installation cost in Australia?

A single split runs about $1,500-5,000 installed; multi-head systems $5,000-14,000; ducted whole-home from around $9,000. Long pipe runs, second-storey installs and three-phase power push prices up.

Compare aircon installation quotes in Melbourne — free

Free, no obligation. Sign in with Google to send your request.

How Handld works

  1. 1

    Tell us what you need

    Describe the job and where you are. It takes about a minute.

  2. 2

    We match your request

    Your request goes to local professionals who cover your area and service.

  3. 3

    Compare quotes and choose

    Pros reply with quotes. Compare, ask questions and hire on your terms — free for you.

Aircon Installation near Melbourne

Related services in Melbourne

Related cost guides