Window Repair in Washington

A full overhaul strips the sashes out, replaces cords/springs and beads, eases and adjusts, adds draught brush seals, and re-hangs. It transforms operation and draughts while keeping original glass and joinery — the standard treatment for period timber windows before anyone talks replacement.

Yes — the sealed glass unit swaps out of the existing frame, restoring clarity and insulation for far less than a new window. 'Demisting' services that drill the unit are cheaper still but results are mixed and insulation isn't restored; most pros recommend a new sealed unit.

Single-pane glass is usually same- or next-day: glaziers cut to size on the van or board up and return with the pane. Double-glazed sealed units are made to order — expect a temporary board-up or the cracked unit staying in place for one to two weeks until the replacement unit arrives.

Most window repairs are call-out jobs: hardware fixes (handles, hinges, locks, rollers) sit at the low end, replacing a failed double-glazed sealed unit sits mid-range, and structural frame or sash overhauls cost the most. Repair typically runs a quarter to half of replacement — get both numbers quoted when a window is marginal.

Usually worn friction hinges, tired rollers on sliders, or a dropped sash catching the frame. These are standard parts a repairer replaces in under an hour. Ignoring a dropping casement eventually strains the frame and glass, turning a cheap fix into a big one.

Reputable repairers warranty parts and labour — typically 1-2 years on hardware and 5-10 years on new sealed glass units. Ask specifically, because warranty length on the sealed unit is a good proxy for the quality of unit they fit.

Repair wins when the frame is sound: misted glass units, broken hardware, draughts and stiff sashes are all fixable at a fraction of replacement cost. Replace when frames are rotten through, warped, or repairs recur — or when energy performance is the real goal and the windows are single-glazed anyway.

Replacing the sealed glass unit typically runs $200-600 per window depending on size and glass spec — versus $500-1,500+ for full window replacement. Defogging drill services run $70-150 but don't restore insulation.