TV Mounting in Cypress
Compare local tv mounting pros in Cypress and get free quotes — no obligation, no call-backs you didn't ask for.
Typical price: $75–$550
Free, no obligation. Sign in with Google to send your request.
TV Mounting prices in Cypress
| Job size | Low | Typical | High |
|---|---|---|---|
| Small TV under 43" on drywall Fixed or tilting mount into studs, cables tidied but not concealed | $75 | $140 | $230 |
| Standard TV 43-65" Fixed or tilting mount, stud wall, basic cable management | $110 | $180 | $280 |
| Large TV 65"+ or full-motion mount Heavier hardware, two-person lift, articulating arm | $170 | $260 | $410 |
| In-wall cable concealment add-on Low-voltage cables in wall cavity plus code-compliant power solution | $140 | $280 | $460 |
| Brick, stone, or above-fireplace install Masonry drilling, heat check, often a pull-down mount | $230 | $370 | $550 |
How to hire a tv mounting pro in United States
- Confirm your wall type (drywall with studs, brick, or stone) and TV size before requesting quotes — both drive the flat rate
- Ask whether the installer carries general liability insurance (a $1M policy is the norm for handyman services)
- If you want a new outlet behind the TV, confirm they use a licensed electrician — new receptacles are code-regulated work in every state
- Check that any in-wall cabling uses CL2/CL3 in-wall rated cable, which the NEC requires for concealed low-voltage runs
- Get the all-in price in writing: mount hardware, concealment, and haul-away of packaging are common surprise add-ons
- Read recent reviews on Google, Thumbtack, or Angi that mention your TV size and wall type
TV mounting itself is unlicensed handyman work in the US, but adding a power outlet behind the TV is electrical work governed by the National Electrical Code and state licensing — in most states it must be done by a licensed electrician or under permit. Concealed low-voltage cables must be in-wall rated (CL2/CL3).
Budgeting first?
See the full breakdown of what drives tv mounting prices — job sizes, unit rates, and how to save.
Frequently asked questions
Do I need to buy the TV mount myself?
Either works. Buying your own mount is usually cheaper — check it matches your TV's VESA pattern (the four bolt holes on the back, e.g. 400x400) and its rated weight. Many installers also sell mounts on the day at a markup of roughly 20-50% over retail. If you buy your own, tell the installer the model so they bring the right fixings.
Do I need an electrician for TV mounting?
Not for the mounting itself. You need one only if you want a new power outlet behind the TV, since fixed wiring is electrician-only work in most countries. Many TV mounting companies partner with an electrician or offer the outlet as an add-on — ask when booking so it happens in one visit.
What size TV actually needs professional mounting?
Under 43 inches is a reasonable DIY job if you can find studs and use a level. From 55 inches up, a second pair of hands is essential and mistakes get expensive — a 65-inch panel weighs 20-25 kg and modern bezel-less screens crack easily if gripped wrong. Professionals also carry stud finders, cable detectors, and masonry drills most households lack.
Can a TV be mounted on drywall or plasterboard without studs?
Small TVs (under about 40 inches) can go on hollow drywall with heavy-duty toggle anchors rated for the load, but most professionals prefer to hit at least one stud or install a plywood backing board. For TVs over 50 inches, mounting into studs or masonry is strongly recommended — anchor-only installs on hollow walls are the most common cause of fallen TVs.
Do I need a permit to mount a TV in the US?
No permit is needed for the mounting or for running low-voltage cables in the wall cavity. A permit and/or licensed electrician is typically required only if you add a new power receptacle behind the TV. Many installers bundle a code-compliant power relocation kit instead, which avoids the permit.
How much does cable concealment add to the price in the US?
In-wall concealment on drywall typically adds $100-$300 on top of the base mount price, and $150-$500 if a code-compliant power relocation kit or new outlet is included. On brick or stone, expect surface raceway (paintable trunking) instead, usually $50-$150.
Free, no obligation. Sign in with Google to send your request.
How Handld works
- 1
Tell us what you need
Describe the job and where you are. It takes about a minute.
- 2
We match your request
Your request goes to local professionals who cover your area and service.
- 3
Compare quotes and choose
Pros reply with quotes. Compare, ask questions and hire on your terms — free for you.