Pressure Washing in Lakewood

Pressure washing uses high-pressure water and suits hard surfaces: concrete, pavers, brick. Soft washing uses low pressure plus a cleaning solution and is the right method for painted render, siding, roofs, and timber, where high pressure would strip paint, gouge wood, or crack tiles. A good pro will recommend soft washing for delicate surfaces without being asked.

Fresh oil mostly comes out with a degreaser pre-treatment plus hot-water pressure washing. Old oil that has soaked deep into concrete may only fade, not disappear — an honest pro will tell you this before quoting rather than promising full removal. Ask specifically whether stain treatment is included or extra.

Renting a machine costs a fraction of a pro visit, but consumer machines are slower, and the main risks are damage (etched concrete, stripped paint) and injury — a 3000+ PSI jet can cut skin. DIY makes sense for a small, flat concrete area. Hire a pro for two-storey walls, roofs, timber, render, or anything needing ladders or chemicals.

Move cars off the driveway, clear pots, furniture, and toys from the work area, close all windows and doors, and cover or flag anything fragile like garden lights. Point out hairline cracks, loose pointing, or flaking paint in advance — pros will work around known weak spots but cannot see them under grime.

Light rain is usually fine — surfaces are already wet. Pros avoid freezing temperatures (ice risk on cleaned surfaces and damaged equipment) and heavy storms. In hot dry regions, local water restrictions can limit or ban high-volume outdoor cleaning during drought periods, so check the current rules before booking.

Yes. Too much pressure or the wrong nozzle can etch concrete, blast mortar out of brick joints, splinter timber decking, strip paint, and force water behind siding or render. Roof tiles are especially vulnerable. Ask the pro what PSI and nozzle they plan to use per surface, and whether they soft wash delicate areas.

In most states, no trade license exists for pressure washing — anyone can buy a machine and start a business. That makes insurance verification and reviews your main quality filter. A few cities require a general business license, and contractors must follow local stormwater discharge rules.

Spring and fall are peak season in most of the country — spring to remove winter grime and fall before listing photos or holiday hosting. In the South and humid coastal states, mildew grows year-round, so annual timing matters less than a consistent 12-month cycle. Northern pros mostly stop work below freezing.