Paving & Driveways in Cleburne
Compare local asphalt and concrete driveways pros in Cleburne and get free quotes — no obligation, no call-backs you didn't ask for.
Typical price: $280–$11,000
Free, no obligation. Sign in with Google to send your request.
Paving & Driveways prices in Cleburne
| Job size | Low | Typical | High |
|---|---|---|---|
| Repair / sealcoat Crack filling, patching and sealcoating an existing driveway | $280 | $550 | $1,100 |
| Resurface New asphalt overlay on a sound base | $1,650 | $2,750 | $4,600 |
| New 2-car driveway Full excavation, base and new asphalt or concrete surface | $4,150 | $6,900 | $11,000 |
How to hire a paving & driveways pro in United States
- Check state contractor licensing where it applies and ask for proof of liability insurance
- Get the spec in writing: excavation depth, compacted aggregate base (typically 4-8"), and surface thickness (2-3" asphalt, 4"+ concrete)
- Ask whether a permit or curb-cut approval is needed for widening or a new apron
- Confirm drainage: slope away from the house and garage
- Get at least 3 itemized bids and local references from jobs 3+ years old
- For concrete, agree the joint layout and finish (broom, exposed aggregate) in writing
Driveway work is regulated locally in the US — many cities require a permit for new driveways, aprons or curb cuts, and contractor licensing varies by state. The 'leftover asphalt' driveway scam is common enough that several state attorneys general publish warnings about it.
Budgeting first?
See the full breakdown of what drives paving & driveways prices — job sizes, unit rates, and how to save.
Frequently asked questions
How do I compare paving quotes in Cleburne?
Make each contractor state the excavation depth, sub-base material and compacted depth, surface thickness, edge restraints and drainage plan. In Cleburne, also ask what happens to excavated spoil — cartage and disposal is a real cost that cheap quotes quietly exclude.
Can my existing driveway be resurfaced instead of replaced?
Often yes — asphalt can be overlaid if the base is sound, concrete can sometimes be resurfaced or used as a base for pavers, and sunken block paving can be lifted and relaid on fresh bedding. If the base has failed (widespread cracking, deep ruts), resurfacing only buys a year or two.
What ruins driveways fastest?
A skimped sub-base. The surface layer gets the attention, but 100-200mm of properly compacted hardcore beneath it is what stops sinking, cracking and rutting. Quotes that are far below the rest usually save money underground where you cannot see it.
How long does driveway paving take?
A typical residential driveway takes 2-5 days: excavation and sub-base first, then the surface. Asphalt is drivable within days; new concrete should cure about a week before taking a car's weight; pavers can be used almost immediately once compacted and sanded.
What is the cheapest driveway surface?
Gravel, by a wide margin — but it migrates, ruts and needs topping up. Asphalt is usually the cheapest solid surface, concrete lasts longer for slightly more, and pavers cost most upfront but can be lifted and relaid if services underneath need work.
How much does a new driveway cost?
Driveway cost depends on area, material (asphalt, concrete, block/brick pavers, gravel, resin) and how much excavation and sub-base work is needed. Gravel is cheapest, asphalt and plain concrete mid-range, and block paving or resin-bound surfaces the most expensive per square metre. Quotes should always include excavation, sub-base depth and edging.
Should I be wary of door-knocking paving crews?
Yes. 'We have leftover asphalt from a job down the road' is a classic scam — the material is often laid thin over no base and fails within months, and the crew is untraceable. Reputable paving firms price from a site visit and written spec, not from surplus material on a truck.
Asphalt or concrete driveway in the US?
Asphalt costs less upfront and handles freeze-thaw well (it flexes), which is why it dominates in northern states; concrete lasts longer and stays cooler in southern heat. Sealing asphalt every 3-5 years is the maintenance trade-off.
Free, no obligation. Sign in with Google to send your request.
How Handld works
- 1
Tell us what you need
Describe the job and where you are. It takes about a minute.
- 2
We match your request
Your request goes to local professionals who cover your area and service.
- 3
Compare quotes and choose
Pros reply with quotes. Compare, ask questions and hire on your terms — free for you.
Paving & Driveways near Cleburne
- Paving & Driveways in Burleson
- Paving & Driveways in Mansfield
- Paving & Driveways in Fort Worth
- Paving & Driveways in Cedar Hill
- Paving & Driveways in Arlington
- Paving & Driveways in Waxahachie
- Paving & Driveways in Haltom City
- Paving & Driveways in North Richland Hills
- Paving & Driveways in Duncanville
- Paving & Driveways in DeSoto
- Paving & Driveways in Hurst
- Paving & Driveways in Grand Prairie
- All paving & driveways in Texas