Kitchen Renovation in Little Rock

If the cabinet carcasses are sound and you like the layout, replacing doors, drawer fronts, hardware, and the benchtop delivers most of the visual change for roughly a third to half the cost of a full renovation. It is not worth it when carcasses are water-damaged, the layout fails you daily, or services need rework anyway — then you'd pay twice.

Design and cabinet order first (longest lead time), then strip-out, then first-fix plumbing, gas, and electrical, then walls, ceilings, and flooring, then cabinet installation, then benchtop templating and fitting (often a 1-2 week gap for stone), then appliances, splashback, and second-fix. The benchtop templating gap surprises most first-timers — plan interim use around it.

Open every door and drawer and check alignment and soft-close action; run the tap and check under-sink connections for weeps; test every appliance and outlet; check the benchtop for chips and sealant lines; confirm the splashback is sealed; and collect appliance warranties plus gas and electrical compliance certificates before releasing the final payment.

Kitchen projects legitimately need larger deposits than other renovations because cabinetry is manufactured to order — 20-40% at signing is common for supply-and-install packages, though several countries cap contract deposits by law. Make sure the deposit is tied to the cabinet order being placed, and always keep a final 5-10% until installation snags are fixed.

On-site work for a straightforward same-layout kitchen runs 2-4 weeks; layout changes with plumbing, gas, or electrical rework push it to 4-8 weeks. The hidden timeline is before day one: custom cabinetry commonly has 4-10 week manufacturing lead times, so order early and only demolish once delivery is confirmed.

Minor remodels (same layout, refaced or stock cabinets) run roughly $10,000-$25,000; a full mid-range remodel typically lands $25,000-$60,000; major upscale projects run $60,000-$150,000. Industry cost-vs-value data consistently shows minor kitchen remodels recouping a higher share of cost at resale than upscale ones.

Cabinet and countertop replacement in place generally doesn't; moving the sink or gas range, adding circuits, or removing walls does — permits come from your city or county building department. Your contractor should pull them; a homeowner-pulled permit shifts inspection liability onto you.