Irrigation & Sprinkler Systems in Missouri
Pick your city to see local irrigation / sprinkler contractor prices and request free quotes. Handld covers 23 cities across Missouri.
Typical price: $75–$16,000
Irrigation & Sprinkler Systems across United States · All services in Missouri
Free, no obligation. Sign in with Google to send your request.
Irrigation & Sprinkler Systems by city in Missouri
- Irrigation & Sprinkler Systems in Kansas City
- Irrigation & Sprinkler Systems in St. Louis
- Irrigation & Sprinkler Systems in Springfield
- Irrigation & Sprinkler Systems in Columbia
- Irrigation & Sprinkler Systems in Independence
- Irrigation & Sprinkler Systems in East Independence
- Irrigation & Sprinkler Systems in Lee's Summit
- Irrigation & Sprinkler Systems in O'Fallon
- Irrigation & Sprinkler Systems in Saint Joseph
- Irrigation & Sprinkler Systems in Saint Charles
- Irrigation & Sprinkler Systems in Blue Springs
- Irrigation & Sprinkler Systems in Saint Peters
- Irrigation & Sprinkler Systems in Florissant
- Irrigation & Sprinkler Systems in Joplin
- Irrigation & Sprinkler Systems in Chesterfield
- Irrigation & Sprinkler Systems in Jefferson City
- Irrigation & Sprinkler Systems in Cape Girardeau
- Irrigation & Sprinkler Systems in Oakville
- Irrigation & Sprinkler Systems in Wildwood
- Irrigation & Sprinkler Systems in Wentzville
- Irrigation & Sprinkler Systems in University City
- Irrigation & Sprinkler Systems in Ballwin
- Irrigation & Sprinkler Systems in Liberty
What irrigation & sprinkler systems costs in Missouri
| Job size | Low | Typical | High |
|---|---|---|---|
| Repair / seasonal tune-up Head/valve replacement, controller fix, leak repair or winterization | $75 | $200 | $500 |
| Small yard system (~4 zones) New in-ground system for a small-to-average yard with controller and backflow | $2,000 | $3,500 | $5,500 |
| Large property system (8+ zones) Multi-zone system for a large lawn-and-bed property with smart controller | $5,000 | $8,500 | $16,000 |
Full irrigation & sprinkler systems price guide for United States
Frequently asked questions
Do I need to winterize my irrigation system?
In any climate that freezes, yes — water left in the pipes expands when it freezes and cracks lines, heads and valves, turning a cheap seasonal blow-out into an expensive spring repair. Warm, frost-free climates skip this but still benefit from an annual service. Ask whether winterization is included or a separate visit.
What are red flags when hiring an irrigation installer?
No backflow device where it's required, no zone-by-zone quote, no as-built diagram at handover, ignoring local water-restriction rules, and a design that waters everything on one zone regardless of plant needs. An installer who skips the backflow/compliance question is cutting a corner that can be illegal and unsafe.
How much does an irrigation system cost?
In-ground systems are priced per zone (a valve-controlled area) plus the controller, backflow device and any pump. Total cost scales with yard size, number of zones, and whether you use sprinkler heads, drip lines, or both. A small garden with a few zones is a fraction of a large multi-zone lawn-and-bed system.
What is an irrigation zone and how many do I need?
A zone is a group of sprinklers or drippers controlled by one valve, watering an area with similar needs. You need separate zones because lawn, garden beds and shady areas want different amounts of water, and water pressure limits how many heads run at once. More zones means better watering but higher cost.
Should I use sprinklers or drip irrigation?
Sprinklers (pop-up rotors/sprays) suit lawns; drip lines suit garden beds, hedges and pots because they deliver water slowly at the roots with far less evaporation and waste. Most good systems mix both — sprinkler zones for turf and drip zones for planting. Drip is the water-efficient choice where it fits.
Do I need a backflow preventer?
Almost always where the system connects to mains/drinking water — a backflow preventer stops irrigation water (and any fertiliser or contaminants) siphoning back into the supply. Many areas legally require one, and some require it to be tested by a certified tester periodically. Confirm the local rule; it's a safety and compliance item, not an optional extra.
How much does irrigation repair cost?
Repairs are usually modest: a broken sprinkler head, a leaking valve, a controller reset, or a winter-damaged line. Costs rise if a mainline leak needs digging or the controller/valve manifold needs replacing. A seasonal check-up that catches small leaks early is cheaper than the water wasted by an unnoticed one.
How much does an irrigation system cost in the US?
In-ground systems commonly run $500-1,000 per zone, with a typical yard installed at $2,500-5,000 and larger properties more. Repairs (heads, valves, controller) usually run $75-300; seasonal winterization $75-150.
Irrigation & Sprinkler Systems in other regions
- Irrigation & Sprinkler Systems in California
- Irrigation & Sprinkler Systems in Florida
- Irrigation & Sprinkler Systems in New York
- Irrigation & Sprinkler Systems in Texas
- Irrigation & Sprinkler Systems in Illinois
- Irrigation & Sprinkler Systems in Massachusetts
- Irrigation & Sprinkler Systems in New Jersey
- Irrigation & Sprinkler Systems in Ohio
- Irrigation & Sprinkler Systems in Maryland
- Irrigation & Sprinkler Systems in Washington
- Irrigation & Sprinkler Systems in Michigan
- Irrigation & Sprinkler Systems in Arizona
- Irrigation & Sprinkler Systems in Virginia
- Irrigation & Sprinkler Systems in Georgia
- Irrigation & Sprinkler Systems in Pennsylvania
- Irrigation & Sprinkler Systems in Minnesota
- Irrigation & Sprinkler Systems in Utah
- Irrigation & Sprinkler Systems in Connecticut
- Irrigation & Sprinkler Systems in Indiana
- Irrigation & Sprinkler Systems in North Carolina
- Irrigation & Sprinkler Systems in Colorado
- Irrigation & Sprinkler Systems in Tennessee
- Irrigation & Sprinkler Systems in Wisconsin
- Irrigation & Sprinkler Systems in Oregon
Related cost guides
Free, no obligation. Sign in with Google to send your request.