Heating Repair & Installation in Texas

Yes — nights, weekends and holidays carry premium call-out rates, sometimes double the standard fee. If you're safe and warm enough, waiting for regular hours saves money. Treat a gas smell, carbon-monoxide alarm or no-heat in freezing weather as genuine emergencies where the premium is worth paying.

Common culprits: a tripped thermostat or dead batteries, a clogged filter starving airflow, a pilot/igniter fault, low refrigerant on a heat pump, or a safety lockout from a blocked flue. Change the filter and check the thermostat first; if that doesn't fix it, a technician's diagnostic is the safe next step, especially with any gas smell.

No proof of gas/HVAC registration, no diagnostic before quoting a big repair, pressure to replace immediately without explaining why, quotes with no unit model or sizing, cash-only with no invoice or safety certificate, and skipping permits. Anyone who'll work on gas without showing registration is an immediate walk-away.

A furnace blows heated air through ducts; a boiler heats water for radiators or underfloor heating; a heat pump moves heat electrically and both heats and cools. They need different specialists and have very different running costs — heat pumps are efficient but pricier to install, furnaces cheaper up front. Match the technician to your system type.

Weigh three things: the system's age, the repair cost, and its efficiency. A repair over about half the cost of a new system, on a unit past its expected life, usually means replace — you're otherwise pouring money into something that will fail again. A newer system with a cheap part failure is almost always worth repairing.

An itemized quote lists: the unit make/model and efficiency rating, sizing calculation for your home, removal and disposal of the old system, any flue/duct/electrical work, permits and post-install safety certification, and the labour warranty. Beware quotes that skip the sizing step — an oversized or undersized system wastes money for years.

Annually, ideally before the cold season — a service checks safety (combustion, flue, gas), cleans components and catches small faults before they become breakdowns. Regular servicing is also commonly required to keep manufacturer warranties valid, so skipping it can cost you a claim later.

A service call runs roughly $75-150, common repairs $150-600, and a full furnace or heat-pump replacement commonly $3,000-7,500 (high-efficiency and heat pumps more). Emergency after-hours calls carry a premium.