Handld.org

Fence Installation & Repair in Logan

Compare local fence contractor / fence installer pros in Logan and get free quotes — no obligation, no call-backs you didn't ask for.

Typical price: $280–$18,400

Get quotes from fence installation & repair pros in Logan — free, no obligation

Free, no obligation. Sign in with Google to send your request.

Fence Installation & Repair prices in Logan

Researched estimates for Logan (USD), adjusted for city size from national ranges. Updated 2026.
Job size Low Typical High
Fence repair / short run Replacing a few posts/panels or a small run of fence $280 $740 $1,850
Standard backyard (~150 ft) New residential privacy fence around a typical backyard $2,750 $5,050 $8,300
Full property perimeter (~300 ft) Complete perimeter fencing with gates on a larger lot $5,500 $10,100 $18,400

How to hire a fence installation & repair pro in United States

  1. Check local fence height limits and whether a permit is required (front vs rear, corner lots differ)
  2. Confirm the boundary line — a survey or plat check avoids building on a neighbour's land
  3. Get an itemized quote: material, height, linear feet, gates, and old-fence removal
  4. Confirm posts are set in concrete for solid fences and the material (cedar, pressure-treated, vinyl, chain-link)
  5. Ask for photos or an address of a recent comparable install
  6. Verify licensing/insurance where your state or city requires contractor licensing

Fencing licensing is set locally — some cities/states require a contractor license, others don't. Permits and height limits are almost always local (front-boundary and corner-lot rules are stricter), and pool fences have specific safety-code requirements. Confirm both permit and boundary before building.

Budgeting first?

See the full breakdown of what drives fence installation & repair prices — job sizes, unit rates, and how to save.

Fence Installation & Repair cost guide for United States

Frequently asked questions

Do I need permission or a permit to build a fence?

Height limits and permit rules vary by locality, and front-boundary fences are often more restricted than rear ones. Corner lots, heritage areas and pool fences have their own rules. Check local height limits and whether a permit is needed before you commit — retrofitting a too-tall fence is expensive.

How much does a new fence cost?

Fencing is priced by length (per linear foot or metre) times the material you choose, plus gates, gradient and ground conditions. Material is the biggest swing: chain-link and basic timber sit at the bottom, composite, brick and wrought iron at the top. Always price the full run installed, not just the panels.

How long does a fence installation take?

A standard residential run takes one to three days: posts set in concrete need to cure, so many installers do posts one day and panels the next. Rocky or sloped ground, many gates, or removing an old fence all add time. Wet weather that stops concrete curing is the usual delay.

What fencing material gives the best value?

Pressure-treated timber is the cheapest solid privacy option and the most common; chain-link is cheapest overall but offers no privacy; composite and vinyl cost more up front but need almost no maintenance. Choose on lifetime cost — a cheap timber fence you re-stain every two years can cost more over a decade than composite.

What should a fencing quote include?

An itemized quote lists: fence type and height, total length, number and type of gates, post material and setting method (concrete vs driven), removal and disposal of the old fence, and whether the price is per linear unit or a lump sum. A one-number quote with no length or material is impossible to compare.

Should I repair or replace my fence?

Replace a few rotten posts or panels and repair wins on cost. But once a third or more of the posts are failing, the fence is leaning, or the timber is widely rotten, patch repairs become throwing good money after bad — a full replacement is usually cheaper per year of life.

How much does a fence cost per linear foot in the US?

Installed cost runs roughly $15-40 per linear foot for common materials, averaging around $23: chain-link at the low end, wood mid-range, and vinyl or wrought iron $30-85. A typical backyard (about 150 linear feet) commonly lands at $3,000-7,000 installed.

Compare fence installation & repair quotes in Logan — free

Free, no obligation. Sign in with Google to send your request.

How Handld works

  1. 1

    Tell us what you need

    Describe the job and where you are. It takes about a minute.

  2. 2

    We match your request

    Your request goes to local professionals who cover your area and service.

  3. 3

    Compare quotes and choose

    Pros reply with quotes. Compare, ask questions and hire on your terms — free for you.

Fence Installation & Repair near Logan

Related services in Logan

Related cost guides