Fence Installation & Repair in Amarillo

An itemized quote lists: fence type and height, total length, number and type of gates, post material and setting method (concrete vs driven), removal and disposal of the old fence, and whether the price is per linear unit or a lump sum. A one-number quote with no length or material is impossible to compare.

Ask for photos of recent fences in Amarillo and, ideally, an address you can drive past — fencing quality shows in post-setting and line, which you can see. Confirm they handle the permit/boundary check and get the length, material and gate count in writing before booking.

Setting posts without concrete on a solid fence, no written quote with length and material, vague answers on boundary lines and permits, a large cash deposit before materials arrive, and no photos of past work. Installers who won't discuss the neighbour/boundary question before building are inviting a dispute you'll inherit.

Fencing is priced by length (per linear foot or metre) times the material you choose, plus gates, gradient and ground conditions. Material is the biggest swing: chain-link and basic timber sit at the bottom, composite, brick and wrought iron at the top. Always price the full run installed, not just the panels.

Pressure-treated timber is the cheapest solid privacy option and the most common; chain-link is cheapest overall but offers no privacy; composite and vinyl cost more up front but need almost no maintenance. Choose on lifetime cost — a cheap timber fence you re-stain every two years can cost more over a decade than composite.

Installed cost runs roughly $15-40 per linear foot for common materials, averaging around $23: chain-link at the low end, wood mid-range, and vinyl or wrought iron $30-85. A typical backyard (about 150 linear feet) commonly lands at $3,000-7,000 installed.