Drywall Installation & Repair in Conroe
Compare local drywall installation and repair (sheetrock) pros in Conroe and get free quotes — no obligation, no call-backs you didn't ask for.
Typical price: $140–$2,750
Free, no obligation. Sign in with Google to send your request.
Drywall Installation & Repair prices in Conroe
| Job size | Low | Typical | High |
|---|---|---|---|
| Small patch repair Patch 1-2 holes up to fist size, tape, fill, sand ready for paint | $140 | $280 | $460 |
| Wall section replacement Cut out and replace water-damaged section or one full sheet, finished | $320 | $550 | $920 |
| Full room hang & finish Hang and finish drywall in an average 12x12 room, Level 4 finish | $920 | $1,650 | $2,750 |
How to hire a drywall installation & repair pro in United States
- Check whether your state requires a contractor licence for the job size — e.g. California requires a CSLB licence (C-9 Drywall) for jobs over $1,000
- Ask for proof of general liability insurance and workers' comp if they bring a crew
- Confirm the finish level being quoted (Level 3-5) and whether priming is included
- Get an itemized written estimate separating demo, board, taping/finishing, and haul-away
- For large jobs, check references or photos of painted finished work, not just hung board
- Agree on dust control (plastic sheeting, HEPA sanders) before work starts
Most states allow handymen to do small drywall repairs without a licence, but larger jobs cross state contractor-licence thresholds (e.g. $1,000 in California, $2,500 in Arizona). Building permits are generally not needed for like-for-like repair, but are for altering fire-rated assemblies like garage ceilings.
Budgeting first?
See the full breakdown of what drives drywall installation & repair prices — job sizes, unit rates, and how to save.
Frequently asked questions
What causes drywall cracks and should I worry?
Hairline cracks at joints and above door frames are usually seasonal movement and are cosmetic. Wide (over 3 mm), diagonal, or recurring cracks, or cracks paired with sticking doors, can indicate settlement — get a builder or structural engineer to look before patching.
What is the difference between drywall repair and plastering?
Drywall (plasterboard) repair replaces or patches board sheets and finishes the joints with tape and compound. Traditional plastering applies wet plaster coats over masonry or lath. Older homes often have solid plaster walls that need a plasterer, not a drywall contractor.
Should water-damaged drywall be repaired or replaced?
If board has swollen, sagged, or grown mould it must be cut out and replaced — drying alone is not enough. Fix the leak first, cut back at least 30 cm beyond visible damage, and let the cavity dry before new board goes in. Persistent damp needs a moisture-meter check.
Do drywall contractors charge a minimum fee?
Yes, almost all do. Small patches are priced as a minimum call-out (often 1-2 hours of labour plus materials) because of travel and return visits for coats. Bundling several small repairs into one visit is the cheapest way to get patches done.
How much does drywall repair cost?
Small patch repairs (nail holes, door-knob dents) typically run the price of a 1-2 hour call-out, while larger holes or water-damaged sections cost more because they need cutting back to studs, new board, taping and up to three coats of joint compound. Whole-wall or ceiling replacement is priced per square metre or square foot.
How do I find a good drywall contractor in Conroe?
Look for pros in Conroe with recent photos of finished (painted) work, not just taped joints — finishing quality is where drywall jobs succeed or fail. Ask what finish level they quote (a Level 4 or 5 smooth finish costs more than a basic tape-and-fill) and whether sanding dust control is included.
Do I need a permit for drywall work in the US?
Not for repairs or replacing damaged board like-for-like in most jurisdictions. Permits typically apply when drywall is part of new construction, moving walls, or fire-rated assemblies (like the garage-house wall). Your contractor should know local rules.
Is sheetrock the same as drywall?
Yes — Sheetrock is a USG brand name that became generic in the US, like gypsum board, wallboard, or plasterboard. Contractors quote them identically.
Free, no obligation. Sign in with Google to send your request.
How Handld works
- 1
Tell us what you need
Describe the job and where you are. It takes about a minute.
- 2
We match your request
Your request goes to local professionals who cover your area and service.
- 3
Compare quotes and choose
Pros reply with quotes. Compare, ask questions and hire on your terms — free for you.
Drywall Installation & Repair near Conroe
- Drywall Installation & Repair in The Woodlands
- Drywall Installation & Repair in Spring
- Drywall Installation & Repair in Atascocita
- Drywall Installation & Repair in Cypress
- Drywall Installation & Repair in Huntsville
- Drywall Installation & Repair in Houston
- Drywall Installation & Repair in Channelview
- Drywall Installation & Repair in Alief
- Drywall Installation & Repair in Mission Bend
- Drywall Installation & Repair in Pasadena
- Drywall Installation & Repair in Deer Park
- Drywall Installation & Repair in Missouri City
- All drywall installation & repair in Texas