Demolition Services in Georgia

A soft strip (or strip-out) removes internal non-structural items — fixtures, fittings, linings, services — leaving the structure. Full demolition takes down the structure itself. Renovations usually need a strip-out; only rebuilds or clearances need structural demolition, which is far more involved and regulated.

Debris goes to licensed waste facilities, with much of it (concrete, metal, timber) sorted for recycling. Disposal and tip fees are a big part of the cost, especially where landfill charges are high. Ask whether disposal is included in the quote and where the waste goes.

It scales with what's being removed: an interior strip-out of a single room is the cheap end; a full internal gut of a home is mid-range; a complete structural demolition of a building is the big job. Debris volume, disposal fees, access for machinery, and any hazardous materials drive the price more than floor area alone.

For any building built before asbestos bans (broadly pre-2000), yes — a survey and, if found, licensed removal must happen before demolition. Disturbing asbestos is a serious health hazard and is tightly regulated; a contractor who ignores this is a major red flag.

Gas, electricity and water must be professionally disconnected (capped) by the utility or a licensed trade before demolition begins — not just switched off. This is a safety-critical step; a reputable demolition contractor coordinates it and won't start until it's confirmed.

Structural demolition almost always requires a permit and, for pre-1978/older buildings, asbestos and lead checks. Interior non-structural strip-out sometimes doesn't, but requirements vary by city and county — the contractor should handle permitting.