Countertop Installation in Irving

Quartz and sintered surfaces just need wiping; avoid excessive heat and harsh abrasives. Natural granite and marble need periodic sealing and are more stain-sensitive (marble especially). Ask the installer for material-specific care instructions and how often to reseal.

Dry-cutting engineered (quartz) stone releases silica dust that causes silicosis, a serious lung disease — which is why fabrication must use wet-cutting and proper controls. This is a real, regulated workplace hazard; reputable fabricators take it seriously (see country notes).

In Irving, view finished installs, get the price templated-and-fitted with all cut-outs and edging specified, and confirm who fabricates the stone. Compare quotes on the full installed cost per square foot/metre, not the raw slab price.

Cost is driven by material and area. Laminate is cheapest; granite and quartz sit in the middle; premium natural stone and sintered surfaces are dearest. Priced per square foot/metre or linear metre installed, with templating, cut-outs (sink, hob), edging and removal of the old top usually on top.

In Irving, expect the national typical per square foot or metre for your chosen material, with an island, complex cut-outs and premium edging pushing the total up. Ask for the price templated and fitted, not just the slab.

Quartz commonly runs $50-120 per square foot installed and granite $40-100, with most projects landing at $3,000-7,500 for a typical kitchen. Northeast and coastal metros sit higher; islands and premium edges add cost.