Bathroom Renovation in Indianapolis

Run every fixture: check drainage speed, look under the vanity for weeps, confirm the shower floor falls to the drain (pour a bucket and watch), check grout lines are even and silicone is continuous, and test the extractor fan. Photograph everything and get the waterproofing product and warranty terms in writing before releasing final payment.

A straight swap-in-place refit takes about 1-2 weeks; a full renovation with new waterproofing, retiling, and any layout change takes 2-4 weeks. Add waiting time before the start for fixture delivery and trades scheduling — and note that waterproofing membranes need curing days you cannot compress.

If the renovation strips the shower area back to the substrate, waterproofing must be redone — a failed membrane is the most expensive bathroom defect there is, because the fix means demolishing finished tiling. Several countries regulate wet-area waterproofing explicitly. Never let a contractor tile directly over an old or damaged membrane.

Keep the existing layout, choose mid-range fittings from stocked lines rather than special orders, use large-format tiles only on feature areas, and paint rather than tile ceilings and upper walls. Do not economize on waterproofing, drainage falls, or the tiler's labour — those are the items whose failure costs multiples later.

Angi and HomeAdvisor put most full bathroom remodels around $6,000-$18,000 with a national average near $12,000; primary-suite and high-end remodels commonly run $25,000-$60,000. Per-square-foot pricing typically lands at $70-$250 depending on finish level.

Swapping fixtures in place usually doesn't; moving drains or supply lines, adding circuits, or altering walls usually does — the rules are set by your city or county building department. Unpermitted plumbing and electrical work is a common home-inspection finding that complicates resale.