TV Mounting in Glasgow
Compare local tv wall mounting pros in Glasgow and get free quotes — no obligation, no call-backs you didn't ask for.
Typical price: £40–£350
Free, no obligation. Sign in with Google to send your request.
TV Mounting prices in Glasgow
| Job size | Low | Typical | High |
|---|---|---|---|
| Small TV under 43" on plasterboard Fixed or tilting bracket into studs, cables tidied | £40 | £70 | £120 |
| Standard TV 43-65" Stud or masonry wall, basic cable management | £60 | £100 | £160 |
| Large TV 65"+ or full-motion bracket Articulating arm, two-person lift | £90 | £150 | £250 |
| In-wall cable concealment add-on Cables dropped in stud cavity or chased and made good | £100 | £180 | £300 |
| Brick, chimney breast, or above-fireplace install Masonry fixings, heat check, often pull-down bracket | £120 | £200 | £350 |
How to hire a tv mounting pro in United Kingdom
- Confirm wall type first — UK homes mix plasterboard on stud, dot-and-dab plasterboard over masonry, and solid brick, and each needs different fixings
- Check reviews on Checkatrade, MyBuilder, or TrustATrader that mention your wall type and TV size
- Ask for proof of public liability insurance (£1m-£2m is standard for handyman trades)
- If you want a new socket behind the TV, use an electrician registered with a Part P scheme (NICEIC, NAPIT, or ELECSA)
- Agree the all-in price including the bracket (if supplied) and cable management before the visit
- For rented homes, get the landlord's written consent — drilling is an alteration under most tenancy agreements
TV mounting is unregulated handyman work in the UK, but installing a new socket or fused spur behind the TV is notifiable electrical work under Part P of the Building Regulations in England and Wales — it must be done by a registered electrician or certified via building control. Low-voltage cable concealment is unrestricted.
Budgeting first?
See the full breakdown of what drives tv mounting prices — job sizes, unit rates, and how to save.
Frequently asked questions
Can a TV be mounted on drywall or plasterboard without studs?
Small TVs (under about 40 inches) can go on hollow drywall with heavy-duty toggle anchors rated for the load, but most professionals prefer to hit at least one stud or install a plywood backing board. For TVs over 50 inches, mounting into studs or masonry is strongly recommended — anchor-only installs on hollow walls are the most common cause of fallen TVs.
Do I need to buy the TV mount myself?
Either works. Buying your own mount is usually cheaper — check it matches your TV's VESA pattern (the four bolt holes on the back, e.g. 400x400) and its rated weight. Many installers also sell mounts on the day at a markup of roughly 20-50% over retail. If you buy your own, tell the installer the model so they bring the right fixings.
How long does TV mounting take?
A standard install on a stud or masonry wall takes 30-90 minutes. Add 1-2 hours if cables are being concealed inside the wall, and more again for above-fireplace installs or walls that need reinforcement. Book a 2-hour window to be safe.
How much does it cost to mount a TV?
Most TV mounting jobs are priced as a flat rate per TV, driven by three things: TV size, mount type (fixed, tilting, or full-motion), and wall material. Drywall or plasterboard with timber studs is the cheapest; brick, concrete, or above-fireplace installs cost more. Cable concealment is usually a separate add-on. Ask for the all-in price for your exact TV size and wall type before booking.
Can a TV be mounted on a dot-and-dab plasterboard wall?
Yes — dot-and-dab (plasterboard glued over brick or block, common in post-1980s UK homes) needs special fixings such as corefix bolts that pass through the board into the masonry behind. Standard plasterboard anchors alone are not safe for TVs over about 40 inches on these walls, so tell the installer if your wall sounds hollow but feels solid behind.
Do I need a Part P electrician just to hide the TV cables?
No. Hiding aerial and HDMI cables in the wall or in trunking is not notifiable work. Part P applies only if you add a new socket, fused spur, or extend a circuit behind the TV — that part must be done by a registered electrician (NICEIC/NAPIT) or notified to building control.
Free, no obligation. Sign in with Google to send your request.
How Handld works
- 1
Tell us what you need
Describe the job and where you are. It takes about a minute.
- 2
We match your request
Your request goes to local professionals who cover your area and service.
- 3
Compare quotes and choose
Pros reply with quotes. Compare, ask questions and hire on your terms — free for you.