Roofing in Nuneaton

Often worth it: the access equipment is already up, edge details integrate cleanly, and combined pricing beats two separate jobs. If your gutters are under ten years old and sound, keep them — but have the roofer protect them during tear-off and note their condition in writing.

Full replacements commonly require a building permit or regulatory compliance; small like-for-like repairs usually don't. Rules vary by country and municipality, and a legitimate contractor will know and handle the paperwork — treat 'we don't need a permit' on a full reroof as a flag to double-check.

A straightforward single-family roof takes 1-3 days for asphalt shingles or metal sheeting, and up to 1-2 weeks for tile, slate or complex multi-plane roofs. Weather delays are normal — a competent crew will never strip more roof than they can waterproof the same day.

Flashing is the metal detailing that seals joints — around chimneys, valleys, vents, skylights and wall junctions. These joints move and collect water flow, so flashing fails long before the main covering. If a roofer proposes reusing old flashing on a full replacement, push back.

Dry, settled weather — and before your region's storm or rainy season, not after it starts. Roofers book out weeks or months ahead of peak season, so schedule inspections early; shoulder-season slots are often cheaper and easier to get.

It scales with roof area, pitch, number of storeys, access, and material. Basic asphalt shingle or concrete tile sits at the bottom of the range; metal, slate and clay cost two to four times more. Tear-off of the old covering, disposal, scaffolding or edge protection, and hidden deck repairs are the lines that move a quote most — make sure all four are priced before comparing.

A typical semi-detached re-roof runs £5,000-£12,000, with the national average around £8,000; large or complex roofs reach £13,000-£20,000+. Per-m² rates of £80-£150 including scaffolding are the usual quoting basis, and slate or clay costs substantially more than concrete tile.

Usually not for like-for-like replacement — but Building Regulations apply once you replace over 25% of the covering, and listed buildings or conservation areas may restrict material changes (e.g. swapping slate for concrete tile). Your roofer or local authority can confirm before work starts.