Renovation Contractor in Rochdale

Hold back 10-15% of the contract value for surprises on a standard renovation, and 20% for older properties where opening walls tends to reveal outdated wiring, corroded pipes, or damp. Do not tell the contractor your contingency figure — it is your buffer, not extra scope budget.

Ask every contractor to break the quote into the same line items: demolition, structural, plumbing, electrical, walls and finishes, fixtures, and a stated allowance for materials you choose. Then compare line by line. A single lump-sum number cannot be compared and cannot be enforced when scope questions come up mid-project.

Usually yes for single-room projects if water and power stay connected to the rest of the home; usually no for whole-home work involving dust-heavy demolition or when the only kitchen or bathroom is out of service for weeks. Ask the contractor to phase the works so one bathroom stays functional, and budget for short-term accommodation on gut renovations.

For most markets 10% or less of the contract value is a reasonable deposit, sometimes up to 20-30% for jobs with heavy upfront material orders like custom cabinetry. Several countries cap deposits by law. Never pay a large share of the total before work starts, and never pay the full amount up front.

General builder day rates typically run £200-£320 per day outside London and £300-£450 in London and the South East. Most renovation work is quoted as a fixed project price rather than day rate — Checkatrade cost guides put a full house refurbishment at roughly £800-£2,500 per square metre depending on spec.

They are separate systems. Most internal renovations need no planning permission, but structural work, new drainage, electrics, and replacement windows must comply with Building Regulations and get signed off. Extensions and external changes may need planning permission too — check with your local authority before committing to a design.