Plastering in Motherwell

It is one of the messiest trades — expect splatter, dust and high humidity. Empty the room if possible, or centre furniture under sheeting. Floors should be fully covered. Ask whether the quote includes protecting surfaces and cleaning up.

Fine crazing usually means the plaster dried too fast (heat, draughts) and is cosmetic — fill and paint. Straight-line cracks along boards or above doors indicate movement at joints. Wide or recurring cracks are worth a builder's inspection before redecorating.

Yes, if the substrate is sound — plasterers key the surface and use bonding agents. But blown (hollow-sounding), crumbling, or damp-stained plaster must come off first. A good plasterer taps the walls during the quote to check; be wary of anyone who doesn't.

A skim coat is touch-dry in a day but needs roughly a week to fully dry before painting; full re-plaster can take several weeks depending on thickness, ventilation and season. Paint too early and you trap moisture, causing peeling. Use a mist coat (diluted emulsion) first.

A typical room skim (walls only) runs a few hundred pounds — Checkatrade's 2026 guide puts most rooms in the £400-700 range including materials, with ceilings extra. Full re-plaster after hack-off roughly doubles that.

Yes, overskimming artex is common and avoids disturbing it — but get it tested for asbestos first if it predates 2000. High-relief patterns may need a scrape (only after a negative test) or bonding coat before the skim.