Irrigation & Sprinkler Systems in Barnstaple

Use an installer in Barnstaple who designs to your yard (zones matched to sun, soil and plant type), knows local backflow and water-use rules, and gives an itemized quote by zone. Ask for references and a system as-built diagram at handover so future repairs are easy. Water-efficiency knowledge matters most in dry regions.

No backflow device where it's required, no zone-by-zone quote, no as-built diagram at handover, ignoring local water-restriction rules, and a design that waters everything on one zone regardless of plant needs. An installer who skips the backflow/compliance question is cutting a corner that can be illegal and unsafe.

In-ground systems are priced per zone (a valve-controlled area) plus the controller, backflow device and any pump. Total cost scales with yard size, number of zones, and whether you use sprinkler heads, drip lines, or both. A small garden with a few zones is a fraction of a large multi-zone lawn-and-bed system.

A zone is a group of sprinklers or drippers controlled by one valve, watering an area with similar needs. You need separate zones because lawn, garden beds and shady areas want different amounts of water, and water pressure limits how many heads run at once. More zones means better watering but higher cost.

Sprinklers (pop-up rotors/sprays) suit lawns; drip lines suit garden beds, hedges and pots because they deliver water slowly at the roots with far less evaporation and waste. Most good systems mix both — sprinkler zones for turf and drip zones for planting. Drip is the water-efficient choice where it fits.

Automatic garden systems commonly run £400-900 per zone installed, with a typical domestic garden at £1,500-4,000 and larger gardens more. Drip-and-sprinkler systems for beds and lawn are the usual mix; repairs are modest.