Irrigation & Sprinkler Systems in Ashford

No backflow device where it's required, no zone-by-zone quote, no as-built diagram at handover, ignoring local water-restriction rules, and a design that waters everything on one zone regardless of plant needs. An installer who skips the backflow/compliance question is cutting a corner that can be illegal and unsafe.

Use an installer in Ashford who designs to your yard (zones matched to sun, soil and plant type), knows local backflow and water-use rules, and gives an itemized quote by zone. Ask for references and a system as-built diagram at handover so future repairs are easy. Water-efficiency knowledge matters most in dry regions.

In any climate that freezes, yes — water left in the pipes expands when it freezes and cracks lines, heads and valves, turning a cheap seasonal blow-out into an expensive spring repair. Warm, frost-free climates skip this but still benefit from an annual service. Ask whether winterization is included or a separate visit.

Repairs are usually modest: a broken sprinkler head, a leaking valve, a controller reset, or a winter-damaged line. Costs rise if a mainline leak needs digging or the controller/valve manifold needs replacing. A seasonal check-up that catches small leaks early is cheaper than the water wasted by an unnoticed one.

Almost always where the system connects to mains/drinking water — a backflow preventer stops irrigation water (and any fertiliser or contaminants) siphoning back into the supply. Many areas legally require one, and some require it to be tested by a certified tester periodically. Confirm the local rule; it's a safety and compliance item, not an optional extra.

Automatic garden systems commonly run £400-900 per zone installed, with a typical domestic garden at £1,500-4,000 and larger gardens more. Drip-and-sprinkler systems for beds and lawn are the usual mix; repairs are modest.