Flooring Installation in Rugby

Waterproof materials: vinyl plank/tile, ceramic or porcelain tile, or specifically water-rated laminate. Standard laminate and solid wood swell when water gets into joints, so most installers will advise against them in wet rooms even if you like the look.

Order 8-10% more than the measured area to cover cutting waste, and 12-15% for diagonal or herringbone patterns. Keep a spare box after the job for future repairs — matching a discontinued product years later is difficult.

Vinyl plank (LVP/LVT) is fully waterproof, so it is the safer choice for kitchens, bathrooms and laundries, and it is quieter underfoot. Laminate has a harder, more scratch-resistant wear surface and often looks more like real wood, but standard laminate swells if water sits on it. Prices overlap heavily, so choose by room use rather than price.

Solid hardwood can usually be sanded and refinished 2-3 times over its life, at a fraction of replacement cost. Engineered wood can typically take one light sanding if the top layer is thick enough. Replace when boards are cupped or rotten from water damage, or the wear layer is too thin to sand.

Yes. Solid and engineered wood (and to a lesser degree laminate) should sit in the room where it will be installed for 48-72 hours so it adjusts to local temperature and humidity. Skipping this step is a common cause of gapping and buckling months later. A good installer will schedule delivery a few days before fitting.

Supplied and fitted: laminate roughly £15-£45 per m², LVT (luxury vinyl tile) £25-£60 per m², and engineered wood £40-£90 per m². Labour alone is typically £15-£30 per m², with latex screed subfloor levelling extra.

Most will for an agreed fee including disposal — typically a modest per-room charge. Uplifting old glued vinyl or parquet is slower and costs more, so have the fitter see it before quoting.