Flooring Installation in London

Solid hardwood can usually be sanded and refinished 2-3 times over its life, at a fraction of replacement cost. Engineered wood can typically take one light sanding if the top layer is thick enough. Replace when boards are cupped or rotten from water damage, or the wear layer is too thin to sand.

Yes. Solid and engineered wood (and to a lesser degree laminate) should sit in the room where it will be installed for 48-72 hours so it adjusts to local temperature and humidity. Skipping this step is a common cause of gapping and buckling months later. A good installer will schedule delivery a few days before fitting.

Most quote by area (per square metre or square foot) for the installation itself, with fixed add-ons for prep, removal and trims. Very small jobs are often charged as a half-day or day minimum, so a tiny room can cost disproportionately more per unit of area.

Not always — check. Underlay affects comfort, sound and moisture protection, and apartments often have minimum acoustic requirements for hard flooring. Ask what underlay is specified, whether it includes a vapour barrier for concrete subfloors, and whether it meets any building or strata sound rules.

A single room in click-lock laminate or vinyl is typically done in a day. A whole apartment or house takes 2-5 days depending on area, furniture moving, and how much old flooring must come out. Add a day or more if the subfloor needs levelling compound, and 2-3 days of acclimatisation before wood products are laid.

Supplied and fitted: laminate roughly £15-£45 per m², LVT (luxury vinyl tile) £25-£60 per m², and engineered wood £40-£90 per m². Labour alone is typically £15-£30 per m², with latex screed subfloor levelling extra.

Most will for an agreed fee including disposal — typically a modest per-room charge. Uplifting old glued vinyl or parquet is slower and costs more, so have the fitter see it before quoting.