Flooring Installation in Grays

Solid hardwood can usually be sanded and refinished 2-3 times over its life, at a fraction of replacement cost. Engineered wood can typically take one light sanding if the top layer is thick enough. Replace when boards are cupped or rotten from water damage, or the wear layer is too thin to sand.

Ask every installer to itemise: material brand and wear-layer/thickness, underlay, subfloor prep, old floor removal and disposal, trims, beading and door thresholds, furniture moving, and waste allowance. The headline per-area rate is meaningless without those lines — most disputes come from prep and trims that one quote included and another did not.

Click-lock laminate and vinyl are realistic DIY projects if the subfloor is flat and rooms are simple rectangles. Glue-down vinyl, nail-down hardwood and tile are much less forgiving and usually worth paying for. Note that some manufacturers only honour warranties when a professional installs the product, and mistakes in prep are expensive to undo.

Not always — check. Underlay affects comfort, sound and moisture protection, and apartments often have minimum acoustic requirements for hard flooring. Ask what underlay is specified, whether it includes a vapour barrier for concrete subfloors, and whether it meets any building or strata sound rules.

Order 8-10% more than the measured area to cover cutting waste, and 12-15% for diagonal or herringbone patterns. Keep a spare box after the job for future repairs — matching a discontinued product years later is difficult.

Supplied and fitted: laminate roughly £15-£45 per m², LVT (luxury vinyl tile) £25-£60 per m², and engineered wood £40-£90 per m². Labour alone is typically £15-£30 per m², with latex screed subfloor levelling extra.

Most will for an agreed fee including disposal — typically a modest per-room charge. Uplifting old glued vinyl or parquet is slower and costs more, so have the fitter see it before quoting.