Fence Installation & Repair in Wimbledon

An itemized quote lists: fence type and height, total length, number and type of gates, post material and setting method (concrete vs driven), removal and disposal of the old fence, and whether the price is per linear unit or a lump sum. A one-number quote with no length or material is impossible to compare.

Pressure-treated timber is the cheapest solid privacy option and the most common; chain-link is cheapest overall but offers no privacy; composite and vinyl cost more up front but need almost no maintenance. Choose on lifetime cost — a cheap timber fence you re-stain every two years can cost more over a decade than composite.

A standard residential run takes one to three days: posts set in concrete need to cure, so many installers do posts one day and panels the next. Rocky or sloped ground, many gates, or removing an old fence all add time. Wet weather that stops concrete curing is the usual delay.

Fencing is priced by length (per linear foot or metre) times the material you choose, plus gates, gradient and ground conditions. Material is the biggest swing: chain-link and basic timber sit at the bottom, composite, brick and wrought iron at the top. Always price the full run installed, not just the panels.

Height limits and permit rules vary by locality, and front-boundary fences are often more restricted than rear ones. Corner lots, heritage areas and pool fences have their own rules. Check local height limits and whether a permit is needed before you commit — retrofitting a too-tall fence is expensive.

Supply-and-fit runs roughly £30-70 per metre for standard timber panels, with a typical rear-garden fence (around 15-20m) commonly £700-2,000 installed. Concrete posts and gravel boards cost more up front but outlast timber posts.