Electrician in Ipswich
Compare local electrician pros in Ipswich and get free quotes — no obligation, no call-backs you didn't ask for.
Typical price: £55–£920
Free, no obligation. Sign in with Google to send your request.
Electrician prices in Ipswich
| Job size | Low | Typical | High |
|---|---|---|---|
| Socket or switch replacement Like-for-like swap on existing wiring | £55 | £90 | £170 |
| Light fixture installation Replace or fit new fixture on existing circuit | £55 | £110 | £200 |
| Consumer unit replacement New board with RCBO protection incl. certification | £410 | £600 | £920 |
| EICR inspection Condition report for a 3-bed house | £140 | £180 | £280 |
How to hire a electrician pro in United Kingdom
- For notifiable work (new circuits, consumer unit changes, work in bathrooms), use an electrician registered with a competent person scheme — NICEIC, NAPIT, or ELECSA — so the work self-certifies under Part P of the Building Regulations
- Ask for an Electrical Installation Certificate (EIC) or Minor Works Certificate on completion — don't pay the balance without it
- Get the hourly rate or day rate agreed up front (typically £45-£60/hr, day rate ~£350-£450)
- For bigger jobs, get 2-3 quotes on Checkatrade or MyBuilder with identical scope (points, chasing, making good)
- For house purchases or older homes, commission an EICR (Electrical Installation Condition Report)
- Confirm public liability insurance
In England and Wales, Part P of the Building Regulations makes certain domestic electrical work notifiable — it must be done by an electrician registered with a competent person scheme (NICEIC, NAPIT) or inspected by building control. Landlords must hold a valid EICR (renewed at least every 5 years) for rented homes.
Budgeting first?
See the full breakdown of what drives electrician prices — job sizes, unit rates, and how to save.
Frequently asked questions
What counts as an electrical emergency?
Burning smells from outlets or the panel, sparking, buzzing from the consumer unit, repeated breaker trips you can't isolate, and any exposed live wiring — switch off the affected circuit (or the main switch) and call an emergency electrician. A single dead outlet or a tripped breaker that resets and holds is a next-business-day job at standard rates.
How much does an EV charger installation cost?
A home EV charger install is typically half a day's work: mounting the unit, running a dedicated circuit from the panel, and adding protection devices. Total cost depends on the charger you buy, cable run distance, and whether your panel has spare capacity — a panel upgrade can double the project. In several countries this is notifiable/regulated work, and grants or utility rebates may apply — ask the installer.
How much does it cost to rewire a house?
Rewiring is priced per circuit or per property size and is one of the most invasive electrical jobs — walls are opened, and the house may be partly without power for days. Expect a multi-day job costing two to three orders of magnitude more than a service call. Get itemised quotes (per room or per point), and ask what wall-repair 'making good' is included, as that is where quotes diverge most.
How much does an electrician cost?
Electricians charge an hourly rate plus, often, a call-out or service fee covering travel and the first period on site. Small jobs (replace a socket, install a light fixture) are usually a minimum-charge visit; bigger jobs like panel upgrades or rewiring are quoted fixed. Batch small jobs into one visit — the minimum charge dominates the cost of single small tasks.
How much does an electrician cost in the UK?
Hourly rates typically run £45-£60 (average around £50), with day rates of £350-£450. Emergency call-outs run £80-£100+ per hour. London and the South East price 20-40% above the national average.
What is an EICR and when do I need one?
An Electrical Installation Condition Report is a formal inspection of your wiring, typically £150-£300 for a house. Landlords in England legally need one at least every 5 years; buyers should get one on any home older than 25 years or with signs of DIY wiring. It grades defects C1 (danger) to C3 (improvement recommended).
Free, no obligation. Sign in with Google to send your request.
How Handld works
- 1
Tell us what you need
Describe the job and where you are. It takes about a minute.
- 2
We match your request
Your request goes to local professionals who cover your area and service.
- 3
Compare quotes and choose
Pros reply with quotes. Compare, ask questions and hire on your terms — free for you.