Drywall Installation & Repair in Torquay

Drywall (plasterboard) repair replaces or patches board sheets and finishes the joints with tape and compound. Traditional plastering applies wet plaster coats over masonry or lath. Older homes often have solid plaster walls that need a plasterer, not a drywall contractor.

If board has swollen, sagged, or grown mould it must be cut out and replaced — drying alone is not enough. Fix the leak first, cut back at least 30 cm beyond visible damage, and let the cavity dry before new board goes in. Persistent damp needs a moisture-meter check.

Yes, almost all do. Small patches are priced as a minimum call-out (often 1-2 hours of labour plus materials) because of travel and return visits for coats. Bundling several small repairs into one visit is the cheapest way to get patches done.

Small patch repairs (nail holes, door-knob dents) typically run the price of a 1-2 hour call-out, while larger holes or water-damaged sections cost more because they need cutting back to studs, new board, taping and up to three coats of joint compound. Whole-wall or ceiling replacement is priced per square metre or square foot.

Look for pros in Torquay with recent photos of finished (painted) work, not just taped joints — finishing quality is where drywall jobs succeed or fail. Ask what finish level they quote (a Level 4 or 5 smooth finish costs more than a basic tape-and-fill) and whether sanding dust control is included.

UK convention is a 2-3 mm plaster skim over the boards, giving a harder, seamless surface for paint. Tape-and-joint is faster and cheaper and common in new builds. For patch repairs in a skimmed home, you need a skim to match the existing finish.