How much does tile & grout cleaning cost in United Kingdom?
Free, no obligation. Sign in with Google to send your request.
Key takeaways
- Most tile & grout cleaning jobs in United Kingdom land between £80–£1,100 — known locally as tile and grout cleaning.
- No licence applies in the UK. The Consumer Rights Act 2015 requires reasonable care and skill — relevant for period tile restoration where the damage risk is real. Trade bodies like the NCCA cover hard-floor cleaning too.
- Prices below are researched national ranges, updated July 2026 — not quotes.
Tile & Grout Cleaning prices by job size in United Kingdom
| Job size | Low | Typical | High |
|---|---|---|---|
| Single bathroom floor Small floor plus shower area scrub and extraction | £80 | £130 | £220 |
| Kitchen + hallway (25 m²) Machine scrub and extraction of main tiled areas | £150 | £250 | £400 |
| Whole ground floor (60 m²) + seal Full tiled area cleaned and grout sealed | £400 | £650 | £1,100 |
Per-unit rates
| Unit | Low | Typical | High |
|---|---|---|---|
| per m² | £4 | £8 | £15 |
What affects the price
- Job size and scope — bigger or more complex jobs move you up the ranges above.
- Access and condition — hard-to-reach areas, older properties or neglected maintenance add labour time.
- Materials and quality level — where materials are involved, the grade you choose often matters more than labour.
- Urgency — same-day or out-of-hours work usually carries a premium.
- Where you live — large metros in United Kingdom typically run above the national range; smaller towns below it.
How to save
- Get at least three quotes and compare like-for-like scopes, not just totals.
- Be flexible on timing — off-peak slots are often cheaper.
- Bundle related tasks into one visit to spread call-out costs.
- Agree the scope in writing up front to avoid change-order surprises.
How to hire a tile & grout cleaning pro in United Kingdom
- Confirm machine agitation plus extraction, not just manual scrubbing
- Identify your surface — victorian quarry tiles, natural stone and porcelain each need different chemistry
- Get a per-square-metre quote with minimum charge in writing
- Ask about sealing (essential on victorian and stone floors, useful on cement grout)
- Check public liability insurance
- For period floors, ask for references on similar restorations
Red flags
- Acid cleaning proposed on stone or victorian tiles
- No site survey for period floors
- Quotes without stated area or rate
- No insurance
How Handld researches prices
These are researched estimates, not quotes and not our transaction data. We compile ranges from published sources — national statistics, trade bodies and incumbent cost guides — normalise them to GBP, and adjust city pages by a population-based cost tier. Last updated July 2026. Basis: Checkatrade tile cleaning cost guide; UK hard-floor restoration company price lists.
Frequently asked questions
What does professional tile and grout cleaning involve?
An alkaline pre-treatment to break down grease and soap scum, machine agitation with rotary brushes, then high-pressure hot water extraction that vacuums the dirty water away. It reaches into grout pores that mopping never touches.
How long does tile and grout cleaning take?
A typical kitchen or bathroom floor takes 1-2 hours; a whole-house tiled floor half a day. Floors are walkable almost immediately after extraction, but wait 24 hours before wet-mopping, and longer if sealer was applied.
How is tile and grout cleaning priced?
Almost always by floor area (per square metre or square foot), with a minimum job charge. Sealing after cleaning, shower recesses, and heavily stained or epoxy-smeared grout cost extra. Wall tiles are quoted separately from floors.
Can cleaning fix discoloured or mouldy grout?
Surface dirt, grease and most mould clean off well. Grout that is stained through its depth, or was never sealed and has absorbed years of dirty mop water, may only lighten. The fallback options are grout colour-sealing or re-grouting.
Why does my grout get dirty again so fast after mopping?
Mopping pushes dirty water into porous grout lines, which sit lower than the tile face and act as gutters. After a professional clean, sealing the grout and switching to a flat microfibre mop with frequent rinse water dramatically slows re-soiling.
Should grout be sealed after cleaning?
Yes for cement-based grout — a penetrating sealer slows re-staining and makes mopping more effective. Sealing is pointless on epoxy grout (already non-porous). Expect sealer to add meaningfully to the bill and need reapplying every 1-3 years in wet areas.
Is professional tile cleaning safe for natural stone?
Marble, travertine and limestone need pH-neutral chemistry — acid-based tile cleaners etch them permanently. Tell the company your surface type up front; stone-safe cleaning and polishing is a different (pricier) service from ceramic/porcelain work.
Can original victorian floor tiles be cleaned and restored in the UK?
Yes — it's a specialist job: gentle chemistry, careful machine work, then impregnating sealer. Expect a per-square-metre rate several times the ceramic-floor price, and always ask for photos of previous victorian restorations before booking.
Free, no obligation. Sign in with Google to send your request.