Bathroom Renovation in Edmonton

A straight swap-in-place refit takes about 1-2 weeks; a full renovation with new waterproofing, retiling, and any layout change takes 2-4 weeks. Add waiting time before the start for fixture delivery and trades scheduling — and note that waterproofing membranes need curing days you cannot compress.

In rough order: whether you move plumbing (relocating the toilet or shower is the single biggest multiplier), the quality tier of tiles and fittings, bathroom size, waterproofing scope, and access (upper floors and apartment buildings cost more). Labour typically makes up 40-60% of the total, so a bigger bathroom does not scale cost linearly — fixture count matters more than floor area.

Buying your own toilet, vanity, and taps gives price control; buying through the contractor makes them responsible for defects, wrong sizes, and delivery timing. A common middle path: contractor supplies everything built-in or warranty-critical (shower valves, waste, membrane), you supply visible items like mirrors and accessories. Whoever supplies an item owns replacing it if it arrives damaged.

Run every fixture: check drainage speed, look under the vanity for weeps, confirm the shower floor falls to the drain (pour a bucket and watch), check grout lines are even and silicone is continuous, and test the extractor fan. Photograph everything and get the waterproofing product and warranty terms in writing before releasing final payment.

It can work on sound, well-bonded wall tiles and saves strip-out cost, but it fails on floors with movement, adds thickness that fouls doors and fittings, and hides the condition of the substrate and membrane. Most renovators strip back in wet areas — if a contractor proposes tile-over-tile in the shower zone specifically, treat it as a cost-cutting red flag.

Make every quote in Edmonton state: strip-out and disposal, first-fix plumbing and electrical, waterproofing (product named), tiling with a per-square-metre rate and tile allowance, fittings supply (brands listed or marked as owner-supplied), and second-fix. The cheapest quote is usually the one missing a line — often waterproofing or disposal.

Checkatrade's 2025-26 guide puts a new bathroom including materials at £5,500-£8,000 with an average around £7,000; budget refits can come in near £3,000-£4,500 and large or high-end bathrooms run £14,000+. Fitting labour alone is typically £1,500-£4,000 depending on scope.

A straightforward refit takes about 5-10 working days; layout changes or first-floor drainage rework push it to two to three weeks. Book fitters ahead — good bathroom installers in most UK cities carry 4-8 week lead times.