Tiling in Muricay
Compare local tile setting pros in Muricay and get free quotes — no obligation, no call-backs you didn't ask for.
Typical price: ₱2,750–₱55,200
Free, no obligation. Sign in with Google to send your request.
Tiling prices in Muricay
| Job size | Low | Typical | High |
|---|---|---|---|
| Kitchen backsplash Tile a standard backsplash, tiles excluded | ₱2,750 | ₱5,500 | ₱9,200 |
| Bathroom floor Prep and tile an average bathroom floor | ₱4,600 | ₱8,300 | ₱13,800 |
| Full bathroom retile Strip, waterproof and retile floor plus walls | ₱18,400 | ₱32,200 | ₱55,200 |
How to hire a tiling pro in Philippines
- Hire a dedicated tile setter (tilero), not a general mason, for visible areas — finish quality differs a lot
- Agree pakyaw (per-project) or per-m² labour pricing upfront
- Buy tiles yourself with 10-15% extra; supply adhesive and grout brands you approve
- Insist on waterproofing for bathrooms and roof decks before tiling
- Get a simple written scope with layout agreed (tile alignment, grout width)
- For condos, secure the admin work permit
No licensing applies to small tiling works in the Philippines (PCAB covers larger contracts). Tile-over-mortar 'dab' installation remains common and causes hollow tiles — specifying full adhesive coverage is the main quality lever.
Budgeting first?
See the full breakdown of what drives tiling prices — job sizes, unit rates, and how to save.
Frequently asked questions
How long does tiling a bathroom take?
A full bathroom (floor plus walls) typically takes 3-5 days: prep and waterproofing first, then setting, then grouting after the adhesive cures. Add days if old tiles must come off or the substrate needs levelling. Rushing cure times is the classic cause of cracked grout later.
How much does it cost to remove old tiles?
Removal is priced per square metre and depends on what's underneath: tiles on board come off fast, tiles on thick sand-cement beds are slow, noisy demolition work. Budget for substrate repairs after removal — you rarely know the wall or floor condition until tiles are off.
What is included in a tiling quote?
Confirm five things: substrate prep (levelling, boards), waterproofing in wet areas, adhesive and grout type, cuts and trims (edge profiles), and silicone to finish. Tiles themselves are usually excluded, and removing old tiles is a separate line that can rival the laying cost.
Do wet areas need waterproofing before tiling?
Yes — tiles and grout are not waterproof; the membrane behind them is. Most countries mandate or strongly standardize wet-area waterproofing, and it must cure before tiling. If a bathroom quote doesn't mention waterproofing, that is the question to ask before anything else.
How do I find a good tiler in Muricay?
Ask tilers in Muricay for photos of finished wet rooms and floor-to-wall junctions — lippage (uneven tile edges), crooked grout lines and bad cuts around fittings are where cheap work shows. Good tilers also talk about substrate prep and waterproofing before they talk about tiles.
How much is tile installation labour in the Philippines?
Skilled tile setters charge roughly ₱300-600 per m² labour, or ₱1,000-2,000 per day with a helper. A typical bathroom retile lands ₱15,000-40,000 in labour and prep before tile cost, higher in Metro Manila.
Free, no obligation. Sign in with Google to send your request.
How Handld works
- 1
Tell us what you need
Describe the job and where you are. It takes about a minute.
- 2
We match your request
Your request goes to local professionals who cover your area and service.
- 3
Compare quotes and choose
Pros reply with quotes. Compare, ask questions and hire on your terms — free for you.