Pressure Washing in Tacloban

High-pressure washing damages most roof coverings — it strips granules from asphalt shingles, cracks and dislodges tiles, and can force water under the covering. Roof cleaning should be done by soft washing or manual moss removal plus a biocide treatment. If a company proposes blasting your roof at full pressure, choose someone else.

Driveway cleaning in Tacloban is usually priced by area and condition. A standard single-car driveway sits at the bottom of the local range; a large or heavily stained double driveway with weed growth and oil marks can cost two to three times more. Ask whether resealing or re-sanding block paving joints is included — that is often a separate line item.

Renting a machine costs a fraction of a pro visit, but consumer machines are slower, and the main risks are damage (etched concrete, stripped paint) and injury — a 3000+ PSI jet can cut skin. DIY makes sense for a small, flat concrete area. Hire a pro for two-storey walls, roofs, timber, render, or anything needing ladders or chemicals.

Safe at high pressure: concrete, block paving, natural stone (with care), brick in good condition, metal fences and gutter exteriors. Needs low pressure or soft washing: painted surfaces, render, timber decking, vinyl or fibre-cement siding, roofs, and old or repointed brickwork. Never pressure wash: single-glazed windows at close range, electrical fittings, or asbestos-containing materials.

Four things drive the spread: surface area and condition (heavy staining doubles the time), access (upper storeys, tight side passages), method (soft washing with chemicals costs more than a quick rinse), and what is bundled (resealing, weed treatment, gutter clear-out). A cheap quote is often just a rinse with no pre-treatment — clarify the scope before comparing numbers.

Yes. Too much pressure or the wrong nozzle can etch concrete, blast mortar out of brick joints, splinter timber decking, strip paint, and force water behind siding or render. Roof tiles are especially vulnerable. Ask the pro what PSI and nozzle they plan to use per surface, and whether they soft wash delicate areas.

A crew with proper equipment typically charges ₱300-₱700 per hour or quotes per job: roughly ₱1,000-₱4,000 for a driveway and garage, ₱3,000-₱12,000 for a full house exterior depending on size. Metro Manila prices are the highest; provincial rates can be 30-40% lower.

The start of the dry season (December-January) gives the longest-lasting results. Washing during the wet season still works but mould and algae on shaded walls can return within 4-8 weeks unless an algaecide treatment is applied.