Plumber in Taytay

A straightforward blockage cleared with a plunger or hand auger is usually a minimum-charge visit — one hour or less. Machine-snaking a stubborn blockage costs more, and a camera inspection plus jetting for recurring blockages is a separate, larger job. If the same drain blocks repeatedly, pay for the camera inspection: repeat call-outs cost more than diagnosing the root cause once.

Plumbers handle supply pipes, fixtures, and internal waste pipes. Drainage specialists handle underground drains, sewers, jetting, and camera surveys. For a recurring underground blockage or collapsed drain, a drainage firm with a jetting rig and CCTV camera is usually cheaper and faster than a general plumber.

Plumbers charge either an hourly rate plus a call-out fee, or a fixed price per job. Small repairs (dripping tap, running toilet) usually cost one to two hours of labour plus parts; bigger jobs like replacing a toilet or water heater are quoted fixed. Always ask whether the call-out fee is waived if you go ahead with the work.

For anything beyond a minor repair, yes — two or three quotes. Make sure each quote covers the same scope: parts included or excluded, disposal of old fixtures, making good tiles or walls, and warranty on the work. The cheapest quote that excludes parts often ends up the most expensive invoice.

Locate your main water shut-off valve, clear access to the problem area (under-sink cupboards, around the toilet or water heater), and take photos of the issue while it is visible. Write down when the problem started and anything that triggers it — good information can cut diagnostic time you are paying for by the hour.

Many plumbers quote labour only because parts vary enormously — a tap can cost ten times more than another tap. 'Parts extra' is fine if the plumber estimates the range up front and shows receipts. Be wary of open-ended parts pricing with no estimate; ask for a not-to-exceed figure on the total.

Skilled tradesman wages are low (around ₱90-₱100/hour), but billed service rates are higher: minor repairs run ₱350-₱1,500 per job, unclogging ₱500-₱2,500, and a full-day skilled rate ₱800-₱2,000 plus materials. Metro Manila is 30-50% above provincial rates.

Not for repairs — a competent tradesman is fine for taps, leaks, and clogs. A PRC-licensed Master Plumber is required when plans need sign-off: new construction, major renovations needing building permits, or condo projects where admin requires sealed plans.