Plastering in Dinaig

Skimming is a thin 2-3 mm finish coat applied over existing plaster or plasterboard to give a smooth paintable surface. Full plastering means building up base (browning/bonding) coats plus a finish coat, needed when old plaster is blown, damp-damaged or removed back to brick.

No — plaster over damp fails within months. The moisture source (rising damp, leaking gutter, condensation) must be fixed first, then damaged plaster cut back and replaced, sometimes with a salt-resistant renovation plaster. Any plasterer who skips the cause is selling you a repeat job.

It is one of the messiest trades — expect splatter, dust and high humidity. Empty the room if possible, or centre furniture under sheeting. Floors should be fully covered. Ask whether the quote includes protecting surfaces and cleaning up.

Yes, if the substrate is sound — plasterers key the surface and use bonding agents. But blown (hollow-sounding), crumbling, or damp-stained plaster must come off first. A good plasterer taps the walls during the quote to check; be wary of anyone who doesn't.

Ask plasterers in Dinaig for photos of finished painted work and check how they handle preparation — good plasterers talk about PVA priming, suction control and drying times, not just the final trowel. Reviews plus a small test area on big jobs are the best filters.

Plastering is usually priced per square metre or per room. A skim coat over existing sound walls is the cheapest job; full re-plastering (hacking off old plaster and applying new base and finish coats) costs two to three times more, and exterior rendering is priced separately.

Palitada is the cement-mortar plaster over hollow block — it levels the wall but stays slightly coarse. Skim coat is a fine finishing layer over palitada that gives the smooth painted look. Quotes often price them per m² separately.