Kitchen Renovation in Marawi City

Set up a temporary station before demolition: microwave, kettle, and a portable induction hob near a sink you can still use (bathroom or laundry). Keep the old fridge running in another room. Budget realistically for more takeaway meals across the 2-6 kitchen-less weeks — it belongs in the project budget alongside tiles.

Open every door and drawer and check alignment and soft-close action; run the tap and check under-sink connections for weeps; test every appliance and outlet; check the benchtop for chips and sealant lines; confirm the splashback is sealed; and collect appliance warranties plus gas and electrical compliance certificates before releasing the final payment.

Replacing cabinets and appliances in place rarely needs a permit in Marawi City. Moving gas lines, altering drainage, removing walls, or adding circuits usually does, under your local building rules — and gas and electrical work must be done by licensed or registered trades in most countries. Ask the contractor to name the exact approval and who obtains it.

Force each quote in Marawi City to the same structure: cabinetry (per unit or per linear metre, hardware brands named), benchtop (material, thickness, cutouts), appliances (included or excluded), trades (plumbing, gas, electrical itemized), installation labour, and old-kitchen disposal. Kitchen quotes hide differences in hardware and edge details — two 'identical' quotes can differ by a third once those are surfaced.

Ordering cabinets before finalizing appliance models; demolishing before cabinet delivery is confirmed; skimping on drawers (they beat cupboards for base storage); too few power outlets; no dedicated circuits for ovens and induction hobs; and treating ventilation as an afterthought — a recirculating hood where ducting was feasible is a permanent regret.

Flat-pack (IKEA-type) is the budget floor and works well in standard-shaped rooms with a good installer. Semi-custom modular ranges fit most kitchens at mid price. Fully custom joinery costs a large premium and earns it only for awkward spaces, non-standard heights, or specific design goals. The door and drawer hardware quality matters more to daily life than the box construction.

Basic renovations run roughly ₱100,000-₱350,000, while significant remodels with new cabinets, counters, and appliances land ₱400,000-₱800,000 for most homeowners; high-end custom projects reach ₱1.2M-₱2M. Provincial labor runs 20-30% below Metro Manila.

Site-built cabinets by skilled carpenters cost less and fit odd spaces, but quality depends entirely on the crew and the plywood grade — specify marine plywood in wet zones. Modular systems cost more, install in days, and have consistent hardware. Either way, laminate or spray-paint finish choice moves the price more than the box.