Irrigation & Sprinkler Systems in Masantol

A zone is a group of sprinklers or drippers controlled by one valve, watering an area with similar needs. You need separate zones because lawn, garden beds and shady areas want different amounts of water, and water pressure limits how many heads run at once. More zones means better watering but higher cost.

Repairs are usually modest: a broken sprinkler head, a leaking valve, a controller reset, or a winter-damaged line. Costs rise if a mainline leak needs digging or the controller/valve manifold needs replacing. A seasonal check-up that catches small leaks early is cheaper than the water wasted by an unnoticed one.

No backflow device where it's required, no zone-by-zone quote, no as-built diagram at handover, ignoring local water-restriction rules, and a design that waters everything on one zone regardless of plant needs. An installer who skips the backflow/compliance question is cutting a corner that can be illegal and unsafe.

Sprinklers (pop-up rotors/sprays) suit lawns; drip lines suit garden beds, hedges and pots because they deliver water slowly at the roots with far less evaporation and waste. Most good systems mix both — sprinkler zones for turf and drip zones for planting. Drip is the water-efficient choice where it fits.

In any climate that freezes, yes — water left in the pipes expands when it freezes and cracks lines, heads and valves, turning a cheap seasonal blow-out into an expensive spring repair. Warm, frost-free climates skip this but still benefit from an annual service. Ask whether winterization is included or a separate visit.

Automatic residential systems commonly run PHP 20,000-50,000 per zone installed depending on pump and pipework, with a typical garden at PHP 60,000-200,000. Simple hose-timer drip setups cost far less; full pumped systems most.