Glass & Glazing in Orani

Look for glaziers in Orani who ask the right questions up front: exact fault, frame material, and whether the location legally requires safety glass. Van-stocked outfits can cut float glass on-site same day; toughened and sealed units are always a made-to-order return visit.

Frameless screens use 8-10 mm toughened glass with polished edges and specialist hardware, priced per panel plus installation. Semi-frameless and framed options run meaningfully cheaper. Accurate templating matters — out-of-square walls are why this is not a DIY product.

Toughened (tempered) glass is heat-treated to be several times stronger and crumbles into blunt granules when broken. Laminated glass sandwiches a plastic interlayer so it cracks but stays in place — better for security and overhead glazing. Codes dictate which is required where; laminated also blocks more noise and UV.

Shallow scratches can sometimes be polished out of thick glass and small edge chips stabilized, but cracks always spread — a cracked pane needs replacement. For sealed double-glazed units, any crack means replacing the whole unit since the seal is compromised.

Almost every country requires safety glass (toughened or laminated) in doors, panels beside doors, low-level glazing, bathrooms and balustrades. Replacing broken glass in these spots with ordinary float glass is illegal and dangerous — a competent glazier will refuse to do it.

Custom-cut mirrors are priced per square metre plus polished edges, holes and fitting. Large wall mirrors need proper bonding or mechanical fixing to structure — a glazier job rather than adhesive strips. Bathroom mirrors should be moisture-backed to prevent edge blackening.

Standard float panes run ₱1,000-3,000 installed; tempered panels ₱3,000-8,000. Framed shower enclosures land ₱15,000-40,000 and frameless from ₱30,000 up.