EV Charger Installation in Dipolog

Smart chargers schedule charging for cheap-tariff hours, balance load with the house, and report usage. If your electricity plan has off-peak rates or you have solar, a smart charger typically pays for its premium within a year or two. Some jurisdictions mandate smart functionality on new installs.

Increasingly yes, but it needs building/owner-committee approval, a metering plan (charging billed to you), and sometimes shared load management. Several countries now have 'right to charge' rules limiting how strata bodies can refuse. Start with building management early — approvals take longer than the install.

Not always. A 7kW charger draws ~32A continuously — many homes can host it, especially with load-management (the charger throttles when the house is busy). Older or small-capacity supplies, or 22kW ambitions, trigger panel or supply upgrades. The installer's load calculation settles it.

Cable-run distance from your electrical panel to the parking spot, whether the panel has spare capacity or needs upgrading, wall vs pedestal mounting, and smart-charger features. The charger unit is often half the total; the electrical work is the rest.

A straightforward install — charger near the electrical panel, cable run under 10 metres — takes 2-4 hours. Long cable runs, panel upgrades, or three-phase work extend to a full day. The site survey (photos of your panel and parking spot) usually happens before quoting.

A dedicated home charger (7kW single-phase typical, 11-22kW three-phase) charges 3-10x faster than a standard socket, includes proper protection and load management, and is safe for daily use. Trickle-charging from ordinary sockets is a backup, not a solution — sockets aren't built for hours at sustained full load.

Yes — solar-aware smart chargers can divert excess solar generation to the car instead of exporting it. If you have or plan solar, choose a charger with solar-diversion mode; charging from self-generated power is usually the cheapest possible driving fuel.

Often only after electrical work: many homes run modest service entrances, so a 7kW charger may need a Meralco service upgrade plus panel work. Many early adopters start with 3.5kW charging on a verified dedicated circuit — slower but compatible with existing supply.