How much does tile & grout cleaning cost in Philippines?
Free, no obligation. Sign in with Google to send your request.
Key takeaways
- Most tile & grout cleaning jobs in Philippines land between ₱800–₱9,000 — known locally as tile deep cleaning / floor scrubbing.
- No licence applies in the Philippines; DTI consumer-protection channels cover service disputes. Note that undiluted muriatic acid is widely misused for tile cleaning locally and permanently damages grout, stone, and metal fixtures.
- Prices below are researched national ranges, updated July 2026 — not quotes.
Tile & Grout Cleaning prices by job size in Philippines
| Job size | Low | Typical | High |
|---|---|---|---|
| Single bathroom Floor and wall tiles scrubbed, mildew treated | ₱800 | ₱1,500 | ₱2,500 |
| Kitchen + living floors (40 m²) Machine scrub and extraction of main tiled areas | ₱1,800 | ₱3,000 | ₱5,000 |
| Whole house/condo (80 m²) Full tiled floor deep clean across the unit | ₱3,500 | ₱5,500 | ₱9,000 |
Per-unit rates
| Unit | Low | Typical | High |
|---|---|---|---|
| per m² | ₱30 | ₱60 | ₱120 |
What affects the price
- Job size and scope — bigger or more complex jobs move you up the ranges above.
- Access and condition — hard-to-reach areas, older properties or neglected maintenance add labour time.
- Materials and quality level — where materials are involved, the grade you choose often matters more than labour.
- Urgency — same-day or out-of-hours work usually carries a premium.
- Where you live — large metros in Philippines typically run above the national range; smaller towns below it.
How to save
- Get at least three quotes and compare like-for-like scopes, not just totals.
- Be flexible on timing — off-peak slots are often cheaper.
- Bundle related tasks into one visit to spread call-out costs.
- Agree the scope in writing up front to avoid change-order surprises.
How to hire a tile & grout cleaning pro in Philippines
- Book a crew with a floor polisher/scrubber machine and wet-vac, not manual brushes only
- Identify the surface — ceramic tiles dominate; natural stone needs different products
- Get pricing by area or by room with the callout fee stated
- Ask about mould and mildew treatment in bathrooms — year-round humidity feeds regrowth
- For condos, confirm building work-permit compliance
- Get an official receipt
Red flags
- Manual-brush crews marketed as deep cleaning
- Muriatic acid used indiscriminately — a common but damaging local practice on grout and stone
- No dirty-water extraction
- No receipt
How Handld researches prices
These are researched estimates, not quotes and not our transaction data. We compile ranges from published sources — national statistics, trade bodies and incumbent cost guides — normalise them to PHP, and adjust city pages by a population-based cost tier. Last updated July 2026. Basis: Metro Manila cleaning company package rates; Extrapolated from NCR labour rates.
Frequently asked questions
Can cleaning fix discoloured or mouldy grout?
Surface dirt, grease and most mould clean off well. Grout that is stained through its depth, or was never sealed and has absorbed years of dirty mop water, may only lighten. The fallback options are grout colour-sealing or re-grouting.
Why does my grout get dirty again so fast after mopping?
Mopping pushes dirty water into porous grout lines, which sit lower than the tile face and act as gutters. After a professional clean, sealing the grout and switching to a flat microfibre mop with frequent rinse water dramatically slows re-soiling.
Should grout be sealed after cleaning?
Yes for cement-based grout — a penetrating sealer slows re-staining and makes mopping more effective. Sealing is pointless on epoxy grout (already non-porous). Expect sealer to add meaningfully to the bill and need reapplying every 1-3 years in wet areas.
Is professional tile cleaning safe for natural stone?
Marble, travertine and limestone need pH-neutral chemistry — acid-based tile cleaners etch them permanently. Tell the company your surface type up front; stone-safe cleaning and polishing is a different (pricier) service from ceramic/porcelain work.
What does professional tile and grout cleaning involve?
An alkaline pre-treatment to break down grease and soap scum, machine agitation with rotary brushes, then high-pressure hot water extraction that vacuums the dirty water away. It reaches into grout pores that mopping never touches.
How long does tile and grout cleaning take?
A typical kitchen or bathroom floor takes 1-2 hours; a whole-house tiled floor half a day. Floors are walkable almost immediately after extraction, but wait 24 hours before wet-mopping, and longer if sealer was applied.
Should muriatic acid be used to clean tiles in the Philippines?
It's common practice but a bad idea outside controlled use on severe cement haze — it eats cement grout, etches stone, corrodes drains, and the fumes are hazardous. Insist on alkaline degreasers and mechanical scrubbing instead.
Free, no obligation. Sign in with Google to send your request.