Carpentry in Quezon

Photos of finished work at close range (joints, edges, scribing against uneven walls tell you everything), proof of insurance, and references from jobs similar to yours. In Quezon, check whether your job size triggers any local licensing requirement before work starts.

Traditionally, joiners make things in a workshop (doors, windows, staircases, cabinets) and carpenters fit and build on site (framing, trim, decking). Many tradespeople do both; what matters when hiring is whether they specialise in the precision level your job needs.

Custom built-ins are priced by the linear metre/foot and complexity — an alcove shelving unit costs far less than a floor-to-ceiling fitted wardrobe with doors and internals. Materials (MDF vs veneer vs solid timber) can swing the price by 2-3x for the same footprint.

Photos plus measurements get you a ballpark; a site visit gets you a real number. Specify materials, finish (painted, stained, veneer) and hardware up front — 'a shelf' can cost 5x more in walnut with soft-close fittings than in painted MDF.

Yes — splice repairs, resin treatments and section replacement are standard work. But rot is a symptom: the leak or damp source must be fixed first or the repair fails. A good carpenter will point at the water source before quoting the timber fix.

Carpenters charge by the hour, by the day, or per project for defined jobs like built-ins. Rates vary with specialisation: rough/framing carpentry is priced into construction budgets, while finish carpentry (trim, doors, built-ins) commands higher hourly rates for slower, more precise work.

Door hanging and adjustment, skirting/trim and architraves, custom shelving and built-in wardrobes, stair repairs, timber framing, decking frames, stud walls, and repair of rot or damaged timber. Anything cut and fitted from wood on site is carpentry territory.

Skilled finish carpenters earn roughly PHP 800-1,500 per day, with helpers less. Built-in cabinets are typically quoted pakyaw: a bedroom closet lands around PHP 15,000-40,000 including materials depending on the board grade.