Bathroom Renovation in San Juan

In rough order: whether you move plumbing (relocating the toilet or shower is the single biggest multiplier), the quality tier of tiles and fittings, bathroom size, waterproofing scope, and access (upper floors and apartment buildings cost more). Labour typically makes up 40-60% of the total, so a bigger bathroom does not scale cost linearly — fixture count matters more than floor area.

Around 10-20% is normal, sometimes more where custom vanities or imported fittings must be ordered up front — in that case pay the supplier invoice share, not a round 50%. Hold 5-10% back until the room has been used for a week or two and the snag list (grout gaps, silicone, door alignment) is closed.

A like-for-like refit usually needs no permit in San Juan, but moving drainage, altering walls, or adding a new bathroom typically does under your local building rules — and electrical and plumbing work must be done by qualified or licensed trades in most countries. Ask your contractor to name the specific approval needed; see the country checklist on this page for what applies where you live.

A straight swap-in-place refit takes about 1-2 weeks; a full renovation with new waterproofing, retiling, and any layout change takes 2-4 weeks. Add waiting time before the start for fixture delivery and trades scheduling — and note that waterproofing membranes need curing days you cannot compress.

Make every quote in San Juan state: strip-out and disposal, first-fix plumbing and electrical, waterproofing (product named), tiling with a per-square-metre rate and tile allowance, fittings supply (brands listed or marked as owner-supplied), and second-fix. The cheapest quote is usually the one missing a line — often waterproofing or disposal.

Keep the existing layout, choose mid-range fittings from stocked lines rather than special orders, use large-format tiles only on feature areas, and paint rather than tile ceilings and upper walls. Do not economize on waterproofing, drainage falls, or the tiler's labour — those are the items whose failure costs multiples later.

A basic CR renovation runs roughly ₱80,000-₱200,000, a standard full renovation ₱150,000-₱400,000, and high-end projects ₱350,000-₱900,000. Provincial labor is 20-30% cheaper than Metro Manila; imported fixtures dominate the top of the range.

Instant electric (tankless) shower heaters are the standard upgrade and need a dedicated circuit with proper breaker sizing and grounding — have a licensed electrician install it. Multipoint heaters and pressure pumps add cost but matter in buildings with weak water pressure; decide before tiling so piping and wiring go in once.