Aircon Servicing & Repair in Taguig

A standard service covers cleaning or replacing filters, cleaning the evaporator coil and blower, flushing the drainage tray and pipe, checking refrigerant pressure, testing thermostat and controls, and inspecting electrical connections. It does not include repairs, parts, or refrigerant top-ups — those are quoted separately.

Dirty coils and filters make the compressor work harder for the same cooling — energy use can rise 15-30% before you notice weaker airflow. A failing capacitor or low refrigerant has the same effect. A service that restores the unit to spec usually pays for itself in a hot season.

A standard clean-and-check takes 30-45 minutes per indoor unit. A chemical wash takes about an hour per unit, and a full chemical overhaul (where the unit is dismantled) takes 1.5-2 hours per unit. Multi-unit visits are faster per unit.

A unit that trips the breaker at startup usually has a failing compressor, a shorted capacitor, or a wiring fault — all electrical faults that need a technician. Do not keep resetting the breaker; repeated tripping can damage the compressor beyond repair.

If you run multiple units daily, yes — contracts usually price each visit 15-30% below one-off rates, include priority booking during heatwaves, and some include minor parts. For a single, lightly used unit, paying per visit is usually cheaper.

Basic cleaning of a window-type unit runs ₱500-₱900; a split-type indoor unit ₱800-₱1,500 in place, or ₱1,500-₱3,000 for a pull-down/deep clean. Freon top-up, when genuinely needed after a leak repair, adds ₱1,500-₱3,500 depending on refrigerant.

Every 3-4 months for daily-use units — dust, humidity, and near-constant operation clog filters and coils fast. At minimum, wash the filters yourself monthly and book a professional clean before the March-May hot season when providers get booked out.