Aircon Servicing & Repair in Panabo

Refrigerant does not get used up — if the level is low, there is a leak. A proper job is leak detection, repair, then regas, which costs several times a plain top-up but stops the problem recurring. Be wary of any technician who suggests routine annual top-ups.

Once a year is the minimum for a system used seasonally; every 3-4 months if you run it daily in a hot climate. Regular servicing keeps coils and filters clean, which protects the compressor — the most expensive part to replace — and keeps energy use down.

A common rule: if the repair costs more than half the price of a new unit, or the system is over 10-12 years old and needs a compressor or coil replacement, replace it. Newer inverter units are typically 30-50% more efficient, so heavy users recoup part of the cost through lower bills.

A chemical wash cleans the coil, blower, and drain pan in place. A chemical overhaul dismantles the indoor unit completely, soaks the parts, checks bearings and seals, and reassembles it. Choose an overhaul when a wash has not fixed persistent leaks, noise, or weak cooling, or for units neglected for years.

The most common cause is a clogged condensate drain line — dirt and algae block the pipe and water backs up into the room. Other causes are a dirty evaporator coil that ices over and then melts, a cracked drain pan, or an incorrectly sloped drain pipe. A drain flush during a standard service usually fixes it.

You can safely wash or replace filters monthly, keep the outdoor unit clear of leaves and debris, and wipe the indoor casing. Anything involving the refrigerant circuit, electrical components, or coil chemicals should be left to a certified technician — refrigerant handling is legally restricted in most countries.

Basic cleaning of a window-type unit runs ₱500-₱900; a split-type indoor unit ₱800-₱1,500 in place, or ₱1,500-₱3,000 for a pull-down/deep clean. Freon top-up, when genuinely needed after a leak repair, adds ₱1,500-₱3,500 depending on refrigerant.

Every 3-4 months for daily-use units — dust, humidity, and near-constant operation clog filters and coils fast. At minimum, wash the filters yourself monthly and book a professional clean before the March-May hot season when providers get booked out.