Aircon Servicing & Repair in Bulaon

Refrigerant does not get used up — if the level is low, there is a leak. A proper job is leak detection, repair, then regas, which costs several times a plain top-up but stops the problem recurring. Be wary of any technician who suggests routine annual top-ups.

Dirty coils and filters make the compressor work harder for the same cooling — energy use can rise 15-30% before you notice weaker airflow. A failing capacitor or low refrigerant has the same effect. A service that restores the unit to spec usually pays for itself in a hot season.

Pricing depends on the service depth: a basic clean-and-check per unit is the cheapest, a chemical wash costs roughly double, and a full overhaul double again. Multi-unit discounts are standard. Get the per-unit rate and what is included in writing before booking — see the national price ranges on this page as a baseline.

A chemical wash cleans the coil, blower, and drain pan in place. A chemical overhaul dismantles the indoor unit completely, soaks the parts, checks bearings and seals, and reassembles it. Choose an overhaul when a wash has not fixed persistent leaks, noise, or weak cooling, or for units neglected for years.

Most charge a call-out or diagnostic fee that covers travel and the first inspection; many waive or credit it against the repair if you go ahead. Confirm the fee, whether it is credited, and any surcharge for evenings, weekends, or urgent same-day visits before the technician is dispatched.

A unit that trips the breaker at startup usually has a failing compressor, a shorted capacitor, or a wiring fault — all electrical faults that need a technician. Do not keep resetting the breaker; repeated tripping can damage the compressor beyond repair.

Basic cleaning of a window-type unit runs ₱500-₱900; a split-type indoor unit ₱800-₱1,500 in place, or ₱1,500-₱3,000 for a pull-down/deep clean. Freon top-up, when genuinely needed after a leak repair, adds ₱1,500-₱3,500 depending on refrigerant.

Every 3-4 months for daily-use units — dust, humidity, and near-constant operation clog filters and coils fast. At minimum, wash the filters yourself monthly and book a professional clean before the March-May hot season when providers get booked out.