Water Heater Installation & Repair in Perlis

Rule of thumb for storage: 30-40L per person per day of heated storage for typical use — a family of four lands around 150-200L (40-50 gal). For tankless, size by simultaneous outlets and the temperature rise your groundwater requires; your installer should calculate, not guess.

Yes: annual or biennial sediment flush, anode rod check every 2-3 years in hard-water areas, and TPR (pressure relief) valve testing. Tankless units need periodic descaling. Maintenance is the difference between an 8-year and a 15-year unit.

A leaking tank can fail suddenly and flood, and any leak near electrics is hazardous. Shut off the unit's power (or gas) and its cold-water feed valve, then call a professional. A dripping pressure-relief valve specifically signals over-pressure or over-temperature — don't cap it.

Storage tanks: 8-12 years (longer with soft water and anode-rod changes). Tankless/instantaneous units: 15-20 years with descaling. Heat pump water heaters: 10-15 years. A tank leaking from the shell itself is end-of-life — replace, don't repair.

Repair thermostats, elements, and valves on younger units. Replace when the tank shell leaks, the unit is past 8-10 years and needs a major part, or repair quotes exceed roughly a third of replacement cost. Efficiency gains from a modern unit often tip old-unit decisions to replace.

Tankless gives endless hot water and saves space and standby losses, but costs more installed and may need electrical or gas-supply upgrades. Storage tanks are cheaper to buy and fix and handle simultaneous use predictably. Household size, fuel type, and usage pattern decide it.

Fatal electrocutions from faulty shower heaters have occurred in Malaysia where earthing or RCD protection was missing. A working RCD cuts power in milliseconds on leakage. Test the button monthly, and never let anyone install a heater without one.