TV Mounting in Kepong

Yes — brick and concrete are actually stronger than drywall for mounting. The installer uses a hammer drill and masonry anchors (sleeve or wedge anchors). It costs more than a stud wall because drilling is slower and cable concealment usually has to run in surface trunking rather than inside the wall.

A standard install on a stud or masonry wall takes 30-90 minutes. Add 1-2 hours if cables are being concealed inside the wall, and more again for above-fireplace installs or walls that need reinforcement. Book a 2-hour window to be safe.

Under 43 inches is a reasonable DIY job if you can find studs and use a level. From 55 inches up, a second pair of hands is essential and mistakes get expensive — a 65-inch panel weighs 20-25 kg and modern bezel-less screens crack easily if gripped wrong. Professionals also carry stud finders, cable detectors, and masonry drills most households lack.

For seated viewing, the centre of the screen should sit at seated eye level — roughly 100-110 cm (40-43 inches) from the floor for a sofa. For a 65-inch TV that means the bottom edge sits around 60-70 cm up. Mount higher only if you use a tilting mount, e.g. above a fireplace or in a bedroom viewed from the bed.

Often yes for standard sizes — marketplace installation bundles for TVs bought online are competitively priced and include a basic fixed bracket. Book an independent installer instead when you need a full-motion arm, concealed cabling, or mounting on a feature wall, which bundles usually exclude.

Many do — management offices in KL and Penang condos commonly require a simple work permit or contractor registration before drilling, sometimes with a refundable deposit for renovation-scale work (simple bracket drilling usually needs just the permit). Check with your management office a day or two ahead.