Flooring Installation in Setapak

Waterproof materials: vinyl plank/tile, ceramic or porcelain tile, or specifically water-rated laminate. Standard laminate and solid wood swell when water gets into joints, so most installers will advise against them in wet rooms even if you like the look.

A single room in click-lock laminate or vinyl is typically done in a day. A whole apartment or house takes 2-5 days depending on area, furniture moving, and how much old flooring must come out. Add a day or more if the subfloor needs levelling compound, and 2-3 days of acclimatisation before wood products are laid.

Some do for a per-room fee, some expect empty rooms. Clarify before booking: who moves beds, wardrobes and appliances, and who disconnects things like washing machines. Emptying rooms yourself is one of the easiest ways to cut the labour bill.

Solid hardwood can usually be sanded and refinished 2-3 times over its life, at a fraction of replacement cost. Engineered wood can typically take one light sanding if the top layer is thick enough. Replace when boards are cupped or rotten from water damage, or the wear layer is too thin to sand.

It depends mostly on the material. Laminate and vinyl (LVP/LVT) are the cheapest to buy and fastest to fit; engineered wood costs roughly double; solid hardwood and premium tile cost the most. As a rule of thumb labour is 30-50% of the total, with materials, underlay, trims and subfloor prep making up the rest. Get quotes priced per square metre or square foot so you can compare like for like.

Vinyl click flooring typically runs RM4-RM10 per square foot installed (materials around RM3.50-RM5.50 plus labour), laminate RM5-RM12, and solid or engineered timber RM12-RM30. Watch the wear layer — 0.3mm+ is the sensible minimum for homes.

Not for overlaying vinyl or laminate in most cases. Condos require management approval and a refundable renovation deposit; local-council (DBKL/MBPJ etc.) permits apply to structural renovations, not floor coverings.